JVC CA-UXG45 Manual Do Utilizador

If you connect other equipment such as a digital audio player 
to the AUX terminal and play it back, the source 
automatically changes to AUX.

The QP Link indicator is lit while QP Link is activated.

When QP Link is activated...
• If an audio input is received at AUX when the System is 

turned on, the source automatically switches to AUX.

• If an audio input is received at AUX when the System is in 

standby mode, the system automatically turns on and plays 
the audio.

• You cannot change the source while audio input is being 

received at AUX. 
If you press another source button, the QP Link indicator 
blinks several times.

• While playback is going on the portable audio device, QP 

Link may turn the System on even if the Sleep Timer turn 
the System to standby or if you turn the System to standby. 
In this case, deactivate QP Link or stop playback on the 
device connected to the AUX jack.

• If the audio input received at AUX is small, the source may 

not switch to AUX.

• The source may not switch to AUX depending on the 

content of the music.

• It takes a second or two for the source to switch to AUX 

after another equipment such as a digital audio player is 
started and sound is output. This is due to the System 
detecting the signal from the equipment.

• The QP Link does not function:

– If the clock indication is turned off at standby
– During recording
– While Daily Timer is active
– While Recording Timer is active

QP LINK

(No indication)

QP Link

Canceled

UX-G45[UW].BOOK  Page 14  Tuesday, May 30, 2006  2:07 AM