Samsung 80 Manual Do Utilizador

1.  Place your sound system on a fl at surface. 

2.  Fully extend the telescopic aerial. The aerial should be fully extended 

and positioned vertically for optimum reception.

 

3.  Plug the cable from the mains adaptor into the DC input socket on 

the rear of your sound system (marked 'DC') ensuring that the plug is 
pushed fully into the socket. Plug the mains adaptor into a wall socket 
and switch on the socket. The display will show "ROBERTS" for a few 
seconds and then the display will then show "SCANNING". During 
this time the sound system is scanning to fi nd out which DAB radio 
stations are available. While scanning markers will show progress of 
the scan together with a count of stations found. After a short time the 
current time and day will appear on the display. 

4.  If no stations are found, "NO CLOCK" will be displayed. It may be 

necessary to relocate your sound system to a position giving better 
reception. You should then carry out a scan to fi nd stations as described 
on page 9.

IMPORTANT:  The mains adaptor is used as the means of connecting the 
sound system to the mains supply. The mains socket used for the sound 
system must remain accessible during normal use. In order to disconnect 
the sound system from the mains, the mains adaptor should be removed 
from the mains socket outlet completely.

Characters appearing on the LCD display indicate that the sound system 
is connected to and powered from the mains supply.