ONKYO TX-NR901 Manual Do Utilizador
83
Net-Tune
—Continued
Note:
• This procedure can also be performed by using the
TX-NR901’s input selector buttons, [SETUP] button,
[
[
]/[
]/[
]/[
] buttons, [ENTER], and
[RETURN] button.
5-1. IP Address
■
a. DHCP/AUTO IP
This setting determines whether or not the TX-NR901
uses DHCP and AutoIP to automatically configure the IP
Address, SUBNET Mask, Gateway, and DNS Server set-
tings.
uses DHCP and AutoIP to automatically configure the IP
Address, SUBNET Mask, Gateway, and DNS Server set-
tings.
On:
Use DHCP/Auto IP (default).
Off:
Don’t use DHCP/Auto IP.
If you select Off, you must configure the IP Address,
SUBNET Mask, Gateway, and DNS Server settings
yourself. Otherwise, Net-Tune won’t work.
SUBNET Mask, Gateway, and DNS Server settings
yourself. Otherwise, Net-Tune won’t work.
■
b. IP Address
You must specify an IP address if you set the DHCP/
AUTO IP setting to Off.
AUTO IP setting to Off.
Enter a static IP address provided by your ISP.
The IP address must be within the following ranges. Net-
Tune will not work with IP addresses outside of these
ranges.
Tune will not work with IP addresses outside of these
ranges.
Class A:
10.0.0.0 to 10.255.255.255
Class B:
172.16.0.0 to 172.31.255.255
Class C:
192.168.0.0 to 192.168.255.255
Most routers use Class C IP addresses.
■
c. SUBNET Mask
You must specify the subnet mask IP address if you set
the DHCP/AUTO IP setting to Off.
the DHCP/AUTO IP setting to Off.
Enter the subnet mask IP address provided by your ISP
(typically: 255.255.255.0).
(typically: 255.255.255.0).
■
d. Gateway
You must enter a gateway IP address if you set the
DHCP/AUTO IP setting to Off.
DHCP/AUTO IP setting to Off.
Enter the gateway IP address provided by your ISP.
■
e. 1st DNS Server, f. 2nd DNS Server
You must enter the DNS server IP addresses if you set
the DHCP/AUTO IP setting to Off.
the DHCP/AUTO IP setting to Off.
Enter the DNS server IP addresses provided by your ISP.
If your ISP supplied only one DNS address, enter it in
the e. 1st setting.
If your ISP supplied only one DNS address, enter it in
the e. 1st setting.
5-2. Proxy Setup
If you use a proxy server with your Internet connection,
you must enter the proxy server settings provided by
your ISP.
you must enter the proxy server settings provided by
your ISP.
■
a. Proxy Server
This setting determines whether or not the TX-NR901
uses a proxy server for Internet radio.
uses a proxy server for Internet radio.
On:
Use proxy server.
Off:
Don’t use proxy server.
■
b. Proxy Address
You must enter an IP address for a proxy server if you set
the Proxy Server setting to On.
the Proxy Server setting to On.
Enter the proxy server IP address provided by your ISP.
■
c. Proxy Port
You must enter an IP address for a proxy server if you set
the Proxy Server setting to On.
the Proxy Server setting to On.
Enter the proxy port IP address provided by your ISP.
5-3. Mac Address
■
a. MAC Address
You can check the TX-NR901’s MAC (Media Access
Control) address. This address cannot be changed.
Control) address. This address cannot be changed.
5-4. Client Setup
A network typically consists of a server and several cli-
ents. On a Net-Tune network, Net-Tune Central is the
server and the TX-NR901 is the client.
ents. On a Net-Tune network, Net-Tune Central is the
server and the TX-NR901 is the client.
■
a. Client Name
You can check the TX-NR901’s client name. This name
is preset at the factory and cannot be changed.
is preset at the factory and cannot be changed.
■
b. Wakeup on LAN
This setting determines whether or not the TX-NR901
maintains its network connection while its on Standby.
maintains its network connection while its on Standby.
On:
Maintain network connection.
Off:
Close network connection while on Standby
(uses less power).
(uses less power).
■
c. NTSP Port
This is the TCP/IP port number that is used for commu-
nication with the Net-Tune server. To enable communi-
cation, this port number must agree with the port number
setting in Net-Tune Central. Unless you have a special
reason for doing so, don’t change this number.
nication with the Net-Tune server. To enable communi-
cation, this port number must agree with the port number
setting in Net-Tune Central. Unless you have a special
reason for doing so, don’t change this number.
TX-NR901_En.book Page 83 Wednesday, October 1, 2003 9:44 AM