ONKYO TX-NR1000 Manual Do Utilizador

148

•

Make sure that the transmitting ends of both remote con-
trollers are pointing at each other.

•

Are you trying to learn from a remote controller that cannot 
be used for learning? Some commands cannot be learned, 
especially those that transmit several instructions with a 
single button press.

•

On your recorder, make sure the correct input is selected 
(e.g., digital or analog).

•

Make sure that proper output settings are made for the con-
nected devices. Settings are available in the “Rec Out” of 
the “Audio Output Assign” and “Video Output Assign” 
sub-menus under the “Speaker/Output Setup” menu (pages 
91, 92).

•

Was the Sleep function set? The Sleep function turns off 
Zone 2/3 as well as the TX-NR1000/TX-NR5000E. To set 
the Sleep function for Zone 2/3 only, see page 67.

•

Recording and Zone 3 operations use the same circuit and 
therefore cannot be used at the same time. Make sure that 
proper settings are made for outputs. Settings are available 
in “Zone 2 Out” or “Zone 3 Out” of the “Audio Output 
Assign” and “Video Output Assign” sub-menus under the 
“Speaker/Output Setup” menu (pages 91, 92).

•

If no surround back speakers are connected, or the sur-
round back outputs are being used with Zone 2/3, this set-
ting is unavailable.

•

Check the connection between the TX-NR1000/
TX-NR5000E and the LAN port on your router or switch.

•

Make sure that your modem and router are properly con-
nected, and make sure they are both turned on.

•

Make sure that the Network Setup settings are correct 
(page 121).

•

Make sure that your computer meets the system require-
ments listed on page 72.

•

When you download or copy large files on your computer, 
Net-Tune playback may be interrupted. In this case, try 
closing any unused programs, use a more powerful com-
puter, or use a dedicated server computer for Net-Tune 
Central.

•

If Net-Tune Central is serving WAV files to several clients 
at the same time, the network may become overloaded and 
playback may be interrupted. This can be resolved by pre-
paring an Ethernet network exclusively for use with Net-
Tune, separating it from general network traffic, and by 
using switches to improve network performance.

•

Try again later.

•

Make sure that your computer is turned on and that Net-
Tune Central is up and running.

•

Add the MP3, WMA, and WAV files on your computer to 
the Net-Tune Central database. See the Net-Tune Central 
online help for details.

•

Set the TX-NR1000/TX-NR5000E’s POWER switch to 
OFF, wait five seconds, and then set it to ON again (On 
USA, Canadian, and Australian models, disconnect the 
power cord for five seconds, and then reconnect it). If that 
doesn’t help, restart your computer.

•

On the Client Sub-menu, make sure that the NTSP Port set-
ting is set to the same port number as Net-Tune Central. 
Correct as necessary (page 122).

•

Use Net-Tune Central to add album names to your music 
files.

•

Use Net-Tune Central to add artist names to your music 
files.

•

Use Net-Tune Central to add genre names to your music 
files.

•

Use Net-Tune Central to create some playlists.

For other Net-Tune-related issues, please see the Net-Tune 
FAQ on the Onkyo Web site.

•

When a pair of headphones is connected, its listening mode 
changes depending on the mode that was set before it was 
connected.

•

Some settings are not available while using Net-Tune.

•

Some audio adjust functions can’t be used with certain lis-
tening modes.

•

The display is turned off when the Pure Audio listening 
mode is selected.