ONKYO TX-NR1000 Manual Do Utilizador

27

To get more powerful sound output, you can make the 
BTL (Bridged Transless) connection using the front and 
surround back speaker terminals on the TX-NR1000/
TX-NR5000E. In this connection, two speaker outputs 
of the stereo amplifier will be used as mono output by 
combining the individual stereo channel outputs, 
allowing you to get about twice the output.

Note:
When using the BTL connection, make sure that the 
speaker impedance is 8 ohm or higher.
For the settings on the BTL connection, see pages 88, 
89.

In the BTL connection, the (–) L/R speaker terminals on 
the TX-NR1000/TX-NR5000E will not be used.
1.

Connect the (+) terminal on the right speaker to the 
FRONT R SPEAKERS (+) terminal on the 
TX-NR1000/TX-NR5000E and the (–) terminal on 
the right speaker to the SURR BACK R 
SPEAKERS (+) terminal on the TX-NR1000/
TX-NR5000E.

2.

Connect the (+) terminal on the left speaker to the 
FRONT L SPEAKERS (+) terminal on the 
TX-NR1000/TX-NR5000E and the (–) terminal on 
the left speaker to the SURR BACK L SPEAKERS 
(+) terminal on the TX-NR1000/TX-NR5000E.

When you use bi-wiring-enabled speakers for the front 
speakers, you can make the bi-amp connection. In this 
connection, the front and surround back speaker 
terminals will be used for tweeter and woofer, 
respectively. This connection allows you to obtain high 
quality sound as well as maximum treble and bass 
performance from the tweeter and woofer, enriching 
your sound experience.

• When using the bi-amp connection, make sure that 

the speaker impedance is 8 ohm or higher.

For the settings on the bi-amp connection, see pages 88, 
89.

1.

Connect the (+) tweeter terminal of the right 
speaker to the FRONT R SPEAKERS (+) terminal 
on the TX-NR1000/TX-NR5000E and the (+) 
woofer terminal of the right speaker to the SURR 
BACK R SPEAKERS (+) terminal on the 
TX-NR1000/TX-NR5000E.

2.

Connect the (–) tweeter terminal of the right 
speaker to the FRONT R SPEAKERS (–) terminal 
on the TX-NR1000/TX-NR5000E and the (–) 
woofer terminal of the right speaker to the SURR 
BACK R SPEAKERS (–) terminal on the 
TX-NR1000/TX-NR5000E.

3.

Connect the (+) tweeter terminal of the left speaker 
to the FRONT L SPEAKERS (+) terminal on the 
TX-NR1000/TX-NR5000E and the (+) woofer 
terminal of the left speaker to the SURR BACK L 
SPEAKERS (+) terminal on the TX-NR1000/
TX-NR5000E.

4.

Connect the (–) tweeter terminal of the left speaker 
to the FRONT L SPEAKERS (–) terminal on the 
TX-NR1000/TX-NR5000E and the (–) woofer 
terminal of the left speaker to the SURR BACK L 
SPEAKERS (–) terminal on the TX-NR1000/
TX-NR5000E.