ONKYO TX-NR1000 Manual Do Utilizador

 

30

 

In addition to the conventional terminals, the TX-NR1000/TX-NR5000E has various terminals that are capable of next-
generation digital transmission.
Before connecting AV components to the TX-NR1000/TX-NR5000E, make sure that your cable type matches the ter-
minal shape and the signal type and that the cable length is appropriate for the placement of your connected components.

 

*The audio input signal from the ETHERNET (Net-Tune) or MULTI-CH IN terminal will not be output to the HDMI 

OUT terminal. Also, the DVD audio or SACD audio input signal from the i.LINK (AUDIO) terminal will not be output 
to the HDMI OUT terminal.

 

• When you play the audio signal supplied through the i.LINK (AUDIO) interface, the audio signal will not be output 

to Zone 2 or Zone 3. With this connection, you cannot record the audio signal from the source.

• The audio input signal from the LAN port will be output only to the AUDIO OUT terminals as an analog source.
• When you play the audio signal from the PH or AUDIO IN terminals in Zone 3, the input source will be output only 

to the AUDIO OUT terminals as an analog source. Similarly, in this connection, you can record only the audio signal 
as an analog source through the AUDIO OUT terminals.

 

Optical cable

The connection using these cable types trans-
mits digital audio signals. There is no sound 
quality difference among these cable types.

 

Some optical cables have their own covers. 
Before making a connection, remove the cov-
ers. When plugging in a cable, be sure to match 
the connector shape with the terminal shape. 
Each optical terminal on the TX-NR1000/
TX-NR5000E has its own shutter-type cover. 
For the TX-NR1000/TX-NR5000E, plug in the 
optical cables so that the optical cable connec-
tor pushes the terminal cover down.

Coaxial cable

Audio connection 
cable

This connection transmits an analog audio sig-
nal. Plug the red connector (R) into the right 
channel terminal and the white connector (L) 
into the left channel connector.

Multichannel con-
nection cable

The terminals for this cable type are for DVD 
players that are compatible with the DVD-Audio 
format. This connection transmits multichannel 
analog audio signals.

i.LINK connection 
cable
(4-pin (S400) type)

This connection can be used for connecting 
i.LINK (AUDIO)-enabled devices and to transmit 
digital audio signals. Also, multichannel analog 
audio signals from DVD-Audio or Super Audio 
CD format sources will be transmitted digitally. 
The TX-NR1000/TX-NR5000E handles only 
audio signals through i.LINK connection.

Ethernet cable
(CAT-5 Straight 
type)

The Ethernet cable is used for connecting multi-
ple PCs or network-ready audio components 
that constitute a local area network (LAN). A 
LAN is a smaller network composed within a 
house or building. The connecting terminals for 
the Ethernet cables are often called “LAN port” 
or “broadband port.”