ONKYO TX-NR1000 Manual Do Utilizador

66

You can connect speakers and amplifiers for the remote 
zone, and enjoy different sources in a remote zone 
(Zone 2 or Zone 3). 
There are three ways to enjoy in a remote zone: 

• You can enjoy a different source in a remote zone 

while a 5.1 channel source is being played in the 
main room. 

• Adjust the volume level on the TX-NR1000/

TX-NR5000E. 

• You can enjoy a different source in a remote zone while 

a 7.1 channel source is being played in the main room. 

• Adjust the volume level on the pre-main amplifier or 

receiver in the remote zone. 

1. On the Setup menu (See page 88), select 

“Speaker/Output Setup” 

→“Speaker Con-

figuration,” and set “Speaker B Surr Bk” to 
“Powered Zone 2.”

2. Similarly, select “Speaker/Output Setup” 

→ 

“Video Output Assign,” and set the terminal 
connected to the component to “Zone 2 
Out.” 

3. Press the [SETUP] button to close the 

menu.

Connect to any of the following terminals: 
• AUDIO OUT 1-5

Default: 
Analog 4 (AUDIO OUT 4): Zone 2 Out
Analog 5 (AUDIO OUT 5): Zone 3 Out

• DIGITAL OUT OPTICAL 1-2
• DIGITAL OUT COAXIAL 1-2 

1. On the Setup menu (See page 91), select 

“Speaker/Output Setup” 

→ “Audio Output 

Assign,” and set the terminal to which the 
component is connected to “Zone 2 Out” or 
“Zone 3 Out.”

2. Then, set “Zone 2 Out” or “Zone 3 Out” in 

the Audio Output Assign sub-menu to 
“Line Out (fixed).”

3. Similarly, select “Speaker/Output Setup” 

→ 

“Video Output Assign,” and set the terminal 
to which the component is connected to 
“Zone 2 Out” or “Zone 3 Out.”

4. Press the [SETUP] button to close the menu.