Philips OTT2000 Manual Do Utilizador

14 EN

5 Listen to FM

radio stations

Turn the SOURCE knob to select FM

source.

Search for radio stations automatically or

manually.

Note

•

For optimal reception, fully extend the antenna and

adjust its position.

•

You can store a maximum of 20 FM radio stations.

Search for a radio station

automatically

Press and hold / for more than 2

seconds.

The radio automatically tunes to a

station with strong reception.

Repeat step 1 to tune to more stations.

When a radio station with a strong

signal is detected, the search stops and

the radio station is broadcast.

Program radio stations

automatically

Press CLOCK/PROG for more than 2

seconds to activate automatic program

mode.

All available stations are programmed

in the order of waveband reception

strength.

The first programmed radio station is

broadcast automatically.

Press / to select preset radio stations.

Program radio stations

manually

Press / to tune to a radio station.

Press CLOCK/PROG to activate the

programming.

Press / to allocate a number to this

radio station.

Press CLOCK/PROG to confirm.

The radio station is stored with the

selected sequence number.

Repeat steps 1-4 to program more radio

stations.

Note

•

If a radio station is stored over the sequence number

of a previously saved station, the earlier station will be

overwritten.

Select stereo/mono broadcast

To improve the reception of stations with weak

signals, monaural sound should be selected.

• In tuner source, press FM/ST/MO to select

a setting:

• [STEREO]: stereo broadcast.

• [MONO]: monaural broadcast.