Philips MCM103 Manual Do Utilizador
15
9 Other features
Set the alarm timer
This unit can be used as an alarm clock. The
DISC, TUNER or USB is activated to play at a
preset time.
1
Ensure that you have set the clock
correctly.
2
Press and hold TIMER.
3
Press DISC , TUN or USB to select a
source.
4
Press TIMER to confirm.
The hour digits are displayed and begin
»
to blink.
5
Press / to set the hour.
6
Press TIMER to confirm.
The minute digits are displayed and
»
begin to blink.
7
Press / to set the minute.
8
Press TIMER to confirm.
The timer is set and activated.
»
Activate and deactivate alarm timer
1
Press TIMER ON/OFF repeatedly to
activate or deactivate timer.
If timer is activated, the display shows
»
.
If timer is deactivated,
»
disappears on
the display.
Note
Alarm timer is not available in MP3 LINK
•
mode.
If DISC/USB source is selected and the
•
track cannot be played, tuner is activated
automatically.
Program radio stations
manually
Note
You can program a maximum of 20 preset
•
radio stations.
1
Tune to a radio station.
2
Press PROG to activate program mode.
[PROG] (program) blinks on the display.
»
3
Press ALB/PRESET+/- to allocate a
number (1 to 20) to this radio station,
then press PROG to confirm.
The preset number and the frequency
»
of the preset station are displayed.
4
Repeat the above steps to program other
stations.
Note
To overwrite a programmed station, store
•
another station in its place.
Select a preset radio station
1
1
Press ALB/PRESET+/- to select a preset
number.
Tip
FM antenna is fixed to the main unit.
•
Position the antenna as far as possible from
•
TV, VCR or other radiation source.
For optimal reception, fully extend and adjust
•
the position of the antenna.
English
EN
MCM103_98_UM_V1.0.indb 15
9/14/2009 9:48:19 AM