Philips FW798W Manual Do Utilizador

30

Cleaning the Cabinet
• Use a soft cloth slightly moistened with

a mild detergent solution. Do not use a
solution containing alcohol, spirits,
ammonia or abrasives.

Cleaning Discs
• When a disc becomes

dirty, clean it with a
cleaning cloth. Wipe
the disc from the
center out.

• Do not use solvents

such as benzine, thinner, commercially
available cleaners, or antistatic spray
intended for analog records.

Cleaning the CD lens
• After prolonged use, dirt or dust may

accumulate at the CD lens. To ensure
good playback quality, clean the CD lens
with Philips CD Lens Cleaner or any
commercially available cleaner. Follow
the instructions supplied with the
cleaner.

Cleaning the Heads and the Tape Paths
• To ensure good recording and playback

quality, clean the heads, the capstan(s),
and pressure roller(s) after every 50
hours of tape operation.

• Use a cotton swab slightly moistened

with cleaning fluid or alcohol.

• You can also clean the heads by playing

a cleaning tape once.

Demagnetizing the heads
• Use a demagnetizing tape available at

your dealer.

FB219W
• A chamois leather slightly moistened

with water is sufficent for cleaning the
speaker cabinet. Do not use cleaning
agents containing alcohol, spirits,
ammonia or abrasives.

• Do not leave the speakers for a long

time in direct sunlight or other places
where high temperatures can occur.

• Do not expose the speakers to humidity

or rain.

To switch off the TIMER
1 Press CLOCK/TIMER for more than two

seconds.

2 Press Ç on the system to cancel the

timer.
™ The timer is now switched off.
™ The display will show "OFF" and the

 flag disappears.

(for the same

preset  time and source)
1 Press CLOCK/TIMER for more than two

seconds.

2 Press CLOCK/TIMER again to store the

start time.
™ The timer is now switched on.
™ The 

 flag appears on the display.

(only on remote control)

This feature allows you to select a length
of time after which the system will switch
to the standby mode automatically.

• Press SLEEP TIMER on the remote

control repeatedly to select a period of
time.
™ The selections are as follows (time in

minutes):
60 ™ 45 ™ 30 ™ 15 ™ OFF ™
60 …

™ “SLEEP XX” or “OFF” will be

displayed. "

XX" is the time in

minutes.

• When you reach the desired length of

time, stop pressing the SLEEP TIMER
button.
™ After this amount of time passes, the

system will switch to the standby
mode.

To switch off the Sleep Timer
• Press SLEEP TIMER repeatedly until

"

OFF" is displayed, or press the

STANDBY ON button.