Philips MC145 Manual Do Utilizador

You may set the clock by using a time signal which is
broadcast with RDS stations. This only works if the RDS
station is sending this signal.

Automatic clock setting
1 Tune to an RDS station (see “RADIO”).

2 Keep CLOCK/TIMER on the unit pressed for more than

2 seconds.
➞

SEARCH RDS TIME is displayed for a maximum
of 90 seconds. Then the time is displayed.

Note: If 

NO RDS TIME is displayed, no time signal has

been received. In that case you will have to set the
clock manually.

Manual clock setting
1 Switch to standby.

2 Press CLOCK/TIMER on the unit.

➞ The clock digits flash.

3 Press 

5 TUNING 6 on the unit to set the hour.

4 Press 

4 PRESET 3 on the unit to set the minutes.

5 Press CLOCK/TIMER on the unit to confirm the settings.

• When the unit is switched on, press CLOCK/TIMER to

switch the time display on and off.

You may use the unit as an alarm clock, with the CD, tuner
or tape switching on at a set time.

1 Adjust the volume to be used for the alarm.

2 Switch to standby.

3 Keep CLOCK/TIMER on the unit pressed for more than

2 seconds.
➞

flashes and the actual source is displayed.

4 Press SELECT SOURCE on the unit to select the desired

sound source: 

CD, TUNER or TAPE.

Note: 

REC TUN is only used for a timed recording. See
“TAPE DECK” for details.

5 Press CLOCK/TIMER on the unit to confirm the source.

➞ The symbol of the source and 

ON is displayed, the

clock digits flash.

6 Press 

5 TUNING 6 on the unit to set the desired hour

and 

4 PRESET 3 to set the desired minute.

7 Press CLOCK/TIMER on the unit to confirm the settings.

➞

is shown and the timer is armed.

Note: If more than 90 seconds elapses without a button

being pressed, the unit quits the timer setting mode.

• Press TIMER ON/OFF during standby, to switch the timer

off and on.
➞ If the timer is armed 

is shown.

English