ONKYO T-4355 Manual Do Utilizador

9

Remote Controller—Continued

The T-4355 doesn’t have its own remote controller, but 
it can be controlled by using the RC-627S remote con-
troller that’s supplied with the Onkyo A-9355/A-9155 
Integrated Amplifier. The T-4355 and A-9355/A-9155 
must be connected with an 

 cable and an audio cable 

for this to work.

When controlling the T-4355 with the A-9355/A-9155’s 
remote controller, point the controller at the 
A-9355/A-9155’s remote control sensor, as shown.

Notes:
• The remote controller may not work reliably if the 

A-9355/A-9155 is subjected to bright light, such as 
direct sunlight or inverter-type fluorescent lights. 
Keep this in mind when installing.

• If another remote controller of the same type is used 

in the same room, or the A-9355/A-9155 is installed 
close to equipment that uses infrared rays, the remote 
controller may not work reliably.

• Don’t put anything, such as a book, on the remote 

controller, because the buttons may be pressed inad-
vertently, thereby draining the batteries.

• The remote controller may not work reliably if the 

A-9355/A-9155 is installed in a rack behind colored 
glass doors. Keep this in mind when installing.

• The remote controller will not work if there’s an 

obstacle between it and the A-9355/A-9155’s remote 
control sensor.

ON

OFF

POWER

ON

OFF

OFF

ON

A SPEAKERS

B

BASS

TREBLE

STANDBY

PHONES

MUTING

PURE DIREC

T

LOUDNESS

CD

MD

DOCK

TUNER

PHONO

TAPE

T-4355

A-9355/A-9155

30˚

5 m

30˚

RC-627S

Remote control sensor