Philips BTB7150 Manual Do Utilizador

15

EN

6  Other features

Set the alarm timer

This unit can be used as an alarm clock. You can 

select DISC, TUNER, DAB, or USB as alarm 

source.

Note

 

•

Make sure that you have set the clock correctly.

1 

In standby mode, press and hold SLEEP/

TIMER for three seconds.

 

»

[SET TIMER] is displayed, and then 

[DISC] is displayed and begins to blink.

2 

Press   /   (or SOURCE) repeatedly 

to select an alarm source (DISC, TUNER, 

DAB, or USB).

3 

Press SLEEP/TIMER (or OK) to confirm.

 

»

The hour digits are displayed and begin 

to blink.

4 

Repeat steps 2-3 to set hour, minute, and 

adjust volume of the alarm.

Note

 

•

If no button is pressed in 90 seconds, the system exits 

timer setting mode automatically.

To activate or deactivate the alarm timer:

Press SLEEP/TIMER repeatedly to view the 

alarm information and activate or deactivate the 

alarm.

 

»

If timer is activated,   is displayed.

 

»

If timer is deactivated, [TIMER OFF] (timer 

off) is displayed and   disappears.

Tip

 

•

If DISC/USB source is selected, but no disc is placed 

or no USB connected, the system switches to tuner 

source automatically.

Set the sleep timer

To set the sleep timer, in turn on mode, press 

SLEEP/TIMER repeatedly to select a set period 

of time (in minutes).

 

»

When sleep timer is activated,   is 

displayed. Otherwise,   disappears.

Listen to an external device

You can listen to an external device through this 

unit with an audio cable.

1 

Press SOURCE repeatedly to select 

AUDIO IN source.

2 

Connect an audio cable (not supplied) 

between: 

•  AUDIO IN jack (3.5 mm) on the unit;

•  and the headphone jack on an external 

device.

3 

Start to play the device (see the device 

user manual).

  

AUDIO IN

PRESET/ALBUM

MUTE

CLOCK

SLEEP

TIMER

PROG

SOUND

VOL

REPEAT

MENU

DIM

SOURCE

SCAN

SHUFFLE

RDS

INFO

SOURCE