Yamaha YST-M8 Manual Do Utilizador

Active Servo Technology

5 W + 5 W (1 kHz, 4 

Ω

)

200 mV (1 kHz, 4 

Ω

 at 5 W)

25 k

Ω

80 Hz to 20 kHz

6.5 cm (2.5") full-range cone, magnetic shielding

600 

Ω

0.9 V (at 200 mV Rated Input)

DC 12 V

U.S.A. and Canada models

AC 120 V, 60 Hz

Europe and U.K. models

AC 230 V, 50 Hz

Australia model

AC 240 V, 50 Hz

×

×

86 (3 

3

/

8

") 

×

 216 (8 

1

/

2

") 

×

 130 (5 

1

/

8

") mm

0.7 kg (1 lb 9 oz.)/Right channel unit
0.6 kg (1 lb 5 oz.)/Left channel unit

YST-M8 W: Computer white
YST-M8 B: Black

AC adaptor 

×

 1

3.5 mm stereo mini plug cable 

×

 1

RCA plug cable 

×

 1

8 non skid pads 

×

 1

* Specifications subject to change without notice.

The pads supplied with the YST-M8 should be stuck onto
the bottom of each speaker cabinet as shown. As well as
preventing the YST-M8 from slipping around, these pads
also isolate the cabinet from the mounting surface.

6

 (power) switch and indicator: Press the   (power) switch to turn on the

YST-M8; the   indicator will light up. Press it again to turn off. Before
turning on and off, turn down the VOLUME control.

7

VOLUME control: Use this control to set the volume level. Turn it clockwise
to increase the volume, and counterclockwise to reduce it.

8

TONE control: This control allows frequency boost and cut up to 

±

7 dB at

10 kHz. This tends to emphasize vocals, providing a warmer intimate sound.
Turn it clockwise to boost, and counterclockwise to cut.

9

 (headphones) jack: Use this jack to connect stereo headphones for

monitoring. No sound is output from the speakers or the OUTPUT
(ADJ.VOL.) jack when headphones are connected.