Yamaha YSP-4100BL Manual Do Utilizador

The FM tuner of this unit provides the following two 
modes for tuning.

You can tune into a desired FM station by searching or 
specifying its frequency.

You can preset the frequencies of FM stations by 
registering them to specific numbers, and later just 
select those numbers to tune into.

Adjust the FM antenna connected to this unit for the best 
reception.

Press DRADIO repeatedly to select “FM”.

• If you select “FM” with INPUT on the front panel, press 

DRADIO on the remote control prior to step 2 so that you 
can operate the procedures from step 2.

Press PTUNING 

frequency.
The TUNED indicator on the front panel display 
lights up when the tuner is tuned into a station. The
STEREO indicator also lights up if the program being 
broadcasted is in stereo.
See also: “FM Mode” (page 32)

The frequency changes in the following manner 
according to how you press PTUNING  

/ .

When you press the key more than 1 second
The tuner searches the frequency of a station that is 
detectable around the current frequency. This is 
effective when the tuner can receive strong signals 
without any interference. Once the search starts, 
release the key. When you keep holding the key, the 
search continues even when a station is detected. This 
is useful when you want to tune in to a specific 
station.

When you press and release the key
The tuner increases or decreases the frequency in 
steps. Use this method when the tuner cannot receive 
strong signals and stations are skipped during the 
search.

To directly specify the frequency, use 
NNumeric keys to enter the frequency of the 
station.
Enter only integers. For example, if you want to set 
the frequency to 88.9 MHz, enter “889”.

• When you press NNumeric keys during preset tuning, a 

preset number is selected. Set the tuner to the frequency 
tuning mode using PTUNING 

 / 

 prior to the 

operation.

y

• The reception is noisy and the sound is hard to listen, 

switch to monaural mode to get better reception. In the 
option menu, select “Mono” in “FM Mode” (page 32). 

You can register up to 40 FM stations automatically or 
manually.

■ Registering stations automatically

The tuner automatically detects FM stations with strong 
signals and registers up to 40 stations.

Press DRADIO repeatedly to select “FM”.

Press IOPTION.
The option menu (page 32) appears on the front panel 
display.

Press G 

then press GENTER. 

This unit starts to preset FM radio stations in 5 seconds.

y

• You can select the preset number at which the preset starts 

by pressing G 

 / 

 after pressing GENTER.

• To cancel the operation, press IRETURN.

If auto preset is complete, “Preset Complete” 
appears.

To exit from the menu, press IOPTION.

■ Registering stations manually

You can manually register FM stations with weak signals.

Press PMEMORY.
“Manual Preset” appears on the front panel display, 
followed soon by the preset number to which the 
station will be registered.

y

• By holding down PMEMORY for more than 2 seconds, 

you can skip the following steps and automatically register 
the selected station to an empty preset number (next to the 
lastly-registered preset number).

X X X

F M

X

8 8 . 9

X

M H z

3.Auto Preset

P01:FM 87.5 MHz