Yamaha YSP-5100BL Manual Do Utilizador

y

• You can select an audio signal to be played back (Auto or  DTS) 

In “Decoder Mode” (page 32).

■ Input channel indicators

Depending on the channel component of the current 
digital input signal, the input channel indicators in the 
front panel display light up as follows:

y

• Extra (EX1/EX2) indicators light up when 7.1-channnel signals 

recorded in a Blu-lay disc (etc.) are being input. Normally, 
surround back channel signals are recorded in the extra 
channels. This may vary depending on the disc.

You can select the playback method (surround or stereo), desired CINEMA DSP program and decoder to enjoy playback 
of the input source.

Use to select the playback method (surround or stereo).
See also: “ Enjoying CINEMA DSP programs” (page 22), 
“Changing the audio output method for surround 
playback” (page 23).

Press FSURROUND or FSTEREO.
You can enjoy high realistic sensation with surround 
playback and hi-fi sound with stereo playback.

y

• Normal sounds (not sound beams) are output from the front 

right and front left channels. When you play back multi-channel 
sources, all signals except those from the front right and left 
channels are mixed down and output from the front right and 
left channels.

• When the stereo playback is selected, CINEMA DSP (page 22) 

and the decoder (page 24) become ineffective.

This unit is equipped with a Yamaha CINEMA DSP 

(digital sound field processing) chip containing several 
sound field programs used to enhance your playback 
experience. Most of the CINEMA DSP programs are 
precise digital recreations of actual acoustic environments 
of famous concert halls, music venues, and movie theaters.

y

• When you enjoy the CINEMA DSP programs, press F 

SURROUND to select the surround playback, and then follow 
the steps below.

• The CINEMA DSP programs are not available in the following 

conditions.
– Stereo playback is selected.
– HD audio signals are being played back.
– Audio signals with sampling frequency of higher than 96 kHz 

are being played back. 

– Audio signals are output from the PRE OUT jacks. 

When PCM signals are being 
input

When Dolby TrueHD signals are 
being input

When Dolby Digital Plus signals 
are being input

When Dolby Digital signals are 
being input

When Dolby Pro Logic is 
selected as the surround decoder

When Dolby Pro Logic II is 
selected as the surround decoder

When Dolby Pro Logic IIx is 
selected as the surround decoder

When DTS HD Master Audio 
signals are being input

 

 

When DTS HD High Resolution 
signals are being input

 

 

When DTS digital signals are 
being input

When DTS 96/24 signals are 
being input

 

When DTS ES discrete is 
selected as the surround decoder

 

 

When DTS ES matrix is selected 
as the surround decoder

 

 

When DTS Neo:6 is selected as 
the surround decoder

 

2-channel stereo

5.1-channel

6.1-channel

7.1-channel

ECINEMA DSP

EOFF

FSTEREO

FSURROUND

GENTER

G  

/ 

G  

/ 

G 

ISETUP

E

F

I

G