Toshiba RD-XS34SC Manual Do Utilizador
30
Startup/finishing (closing) icons
These icons are displayed on the right corner on the
top of the screen. While they are flashing, the recorder
is operating as follows:
top of the screen. While they are flashing, the recorder
is operating as follows:
Startup, reading a disc, finishing recording
Unloading a disc, finishing the recorder’s
operation
operation
Opening a disc tray
Closing a disc tray
After all the necessary connections,
• Turn on the equipment connected to the
recorder.
• Select the corresponding video input on
your television.
Perform these selections whenever you operate
the recorder.
the recorder.
Turning the power on
Press ON/STANDBY button from the remote control or
on the front panel of the recorder.
on the front panel of the recorder.
When the power turns on, ON/STANDBY indicator
changes color from red (standby mode) to green
(operation).
After a few seconds, a startup screen appears.
changes color from red (standby mode) to green
(operation).
After a few seconds, a startup screen appears.
The following icon will appear on the top right corner
of the screen. The icon will continue flashing
momentarily.
of the screen. The icon will continue flashing
momentarily.
While the icon is flashing, the recorder is checking
the status and reading data of the HDD and the
DVD drive for startup. If the DVD drive does not
contain a disc, the recorder consumes less time to
startup, because it does not need to read data
from the DVD drive.
While the “Loading” icon is flashing, the recorder
cannot respond to any operations of buttons other
than CH/Page and INPUT SELECT. Operate all other
functions after the icon has disappeared.
the status and reading data of the HDD and the
DVD drive for startup. If the DVD drive does not
contain a disc, the recorder consumes less time to
startup, because it does not need to read data
from the DVD drive.
While the “Loading” icon is flashing, the recorder
cannot respond to any operations of buttons other
than CH/Page and INPUT SELECT. Operate all other
functions after the icon has disappeared.
Notes
• When the recorder is turned on for the first time, the
• When the recorder is turned on for the first time, the
Welcome screen will be displayed after the “Loading” icon
has disappeared. See “A: TV Guide On Screen setup”
(
has disappeared. See “A: TV Guide On Screen setup”
(
page 32).
• While displaying “WAIT” on the front panel, do not operate
the recorder or unplug the power cord. Otherwise, this may
result in malfunction of the recorder.
result in malfunction of the recorder.
Turning the power off
Press ON/STANDBY button from the remote control or
on the front panel of the recorder.
on the front panel of the recorder.
The “Unloading” icon appears on the right corner of
the top of the screen, and the ON/STANDBY indicator
turns red. Then the power turns off.
the top of the screen, and the ON/STANDBY indicator
turns red. Then the power turns off.
Note
• If the recorder freezes for about 15 minutes and will not
• If the recorder freezes for about 15 minutes and will not
respond to any buttons, holding down ON/STANDBY
button on the front panel for about 10 seconds can force
the recorder to turn off. However, this is an emergency
measure, which contains a risk of damage to data or discs.
Avoid casual use of this measure. If you try this while the
recorder is operating properly, especially while the
“Loading” or “Unloading” icon is flashing, it may result in re-
initialization of the HDD.
button on the front panel for about 10 seconds can force
the recorder to turn off. However, this is an emergency
measure, which contains a risk of damage to data or discs.
Avoid casual use of this measure. If you try this while the
recorder is operating properly, especially while the
“Loading” or “Unloading” icon is flashing, it may result in re-
initialization of the HDD.
Basic Setup
Starting up the recorder
Loading
e.g.
Loading
Open
Un
loading
Close
ON/STANDBY indicator
ON/STANDBY button
ON/STANDBY button