Yamaha AVX-S80 Manual Do Utilizador

Remove the cap covering the OPTICAL jack when
connecting an optical cable to an OPTICAL jack on the
rear panel of this system. Safely store the cap and always
re-insert it in the terminal when the terminal is not in use.
(This cap prevents the entrance of dust.)

■

Inputs/outputs conventional composite video signal.

• If you connect this system to a video monitor through a video

cassette recorder, the picture may not be played back properly
due to the copyright protection technology incorporated in this
system.

■

Connects an optical cable and provides the better quality
sound than analog audio jacks.
The cable can be inserted directly into the OPTICAL jack
on the front panel.
For the OPTICAL jacks on the rear panel, first remove
the anti-dust cap from a jack, and then connect the cable
to the jack.

Connect the audio pin cable of an audio/video cable.

y

• You can use the digital jacks to input PCM, Dolby Digital and

DTS bitstreams.

• All digital input jacks are acceptable for 96-kHz or lower

sampling digital signals.

• By connecting to the digital jacks, you can enjoy listening to

the multi-channel sound track of a DVD source with sound
field effects.

• The OPTICAL jacks on this system conform to the EIA

standard. If you use an optical cable that does not conform to
this standard, this system may not function properly.

• Once you have connected a recording component to this

system, keep its power turned on while using this system. If the
power is off, this system may distort the sound from other
components.

Ω UNBAL.

Anti-dust cap

Ω UNBAL.

E3-S80-8-18(6.29)a

02.6.29, 4:32 AM

12