Yamaha DVX-C310 Manual Do Utilizador

When you have connected this DVD receiver to an 
HDMI-compatible component via HDMI jack, adjust 
the following menu items to match the audio output 
capability of this DVD receiver.
[AUDIO SETUP PAGE] - [HDMI SETUP]

[HDMI AUDIO] 
Adjust the audio output depending on the connected 
component.

OFF
Selects this to turn off the HDMI audio output.

ALL
Select this if you have connected this DVD receiver to 
a multi-channel decorder or receiver via the HDMI 
jack of this DVD receiver.

PCM ONLY
Select this if the component you have connected via 
the HDMI jack is not capable of decording multi-
channel audio signals. The audio sampling rate 
depends on [LPCM OUTPUT] setting.

[LPCM OUTPUT]
Set this if you have connected this DVD receiver to a 
PCM-compatible component via HDMI jack. Discs 
are recorded at a certain sampling rate. The higher 
sampling rate provides the better sound quality. 

48KHz
Select this to play back discs recorded at the sampling 
rate of 48kHz. All 96kHz PCM data streams (if 
available) are converted to the sampling rate of 48kHz.

96KHz
Select this to play back discs recorded at the sampling 
rate of 96kHz. If the 96kHz disc is copy protected, the 
digital output is automatically converted to the 
sampling rate of 48kHz. 

Use this feature to convert your music CD to a higher 
sampling rate using sophisticated digital signal 
processing for better sound quality. If you activate the 
upsampling function, this DVD receiver automatically 
switches to the stereo mode.
[AUDIO SETUP PAGE] - [CD UPSAMPLING]

OFF
Select this to disable CD-upsampling.

88.2 kHz (X2)
Select this to convert the sampling rate of CDs to 
twice that of the original.

–

This setting is only valid for signals output at the 
analog jacks.

–

If you have activated the upsampling function, this 
DVD receiver automatically switches to stereo 
mode.

In the night mode, high volume output is softened and 
low volume output is brought upward to an audible 
level. It is useful when you watch your favorite action 
movie without disturbing others at night. 
[AUDIO SETUP PAGE] - [NIGHT MODE]

Select this to level out the volume.

Select this when you want to enjoy the full dynamic 
range of surround sound.

This function is only available for Dolby Digital.

This feature allows you to delay the sound output from 
the speaker in order to synchronize it with the video 
image. This may be necessary when using certain 
LCD monitors or projectors.
[AUDIO SETUP PAGE] - [LIP SYNC]

•

Press  

/  to adjust the delay time (between 0 ms 

and 200 ms), and then press ENTER (OK) to confirm 
your selection.

01EN_DVX-C310_UC.book  Page 33  Monday, July 10, 2006  11:22 AM