Yamaha DVX-C310 Manual Do Utilizador

In addition to controlling this DVD receiver, the 
remote control can also operate the other A/V 
components made by YAMAHA and other 
manufacturers. To control other components, you must 
set up the remote control with the appropriate remote 
control codes.

Depending on the external A/V component you are using, 
you may not be able to operate the component with the 
remote control, even if a remote control code is set. In this 
case, operate the component using the supplied remote 
control.

■ Setting remote control codes

Set a TV remote control code for TV and set a cable or 
satellite tuner remote control code for AUX.

1 Press and hold TV or AUX.

2 Press PROG, and then release both keys.

3 Press the numeric keypad (0-9) to enter the 4 digit 

remote control codes (see “LIST OF REMOTE 
CONTROL CODES” at the end of this manual). 

4 Press PROG again to store.

•

Press TV for your TV operations.

POWER (TV)*
Turns on or off the power of your TV.

TV VOL (+/–)*
Adjusts the audio output level of your TV.

TV INPUT*
Switches the input source for the TV.

Numeric keypad (0-9)
Selects a TV channels for playback.

TV CH (+/–)*
Switches between the available TV channels.

*You can also operate these functions in DVD/CD or 
TUNER mode.

•

Press AUX for your cable and satellite tuner 
operations.

POWER (TV)
Turns on or off the power of your cable or satellite 
tuner.

ENTER (OK)
Confirms a selection.

Numeric keypad (0-9)
Cable: enters a number of a cable channel.
Satellite tuner: enters a number of a preset radio 
station.

TV CH (+/–)
Switches between the available cable or satellite tuner 
channels.

01EN_DVX-C310_UC.book  Page 47  Monday, July 10, 2006  11:22 AM