Philips RWSS5510 Manual Do Utilizador
5
4 Product
specifications
Note
Speci cation and design are subject to change
•
without notice.
Wireless receiver
For RWSS5510
For RWSS5510
Power supply rating: 110-240V; ~50-60 Hz
•
Total output power: 250 W (RMS)
•
Power consumption: 50 W
•
Standby power consumption: 0.45 W
•
Frequency response: 150 Hz ~ 20 kHz
•
S/N Ratio: 65 dB (A-Weighted)
•
Distortion: 1%
•
Dimensions (WxHxD): 126 x 131 x 126
•
(mm)
Weight: 1.1 kg
Weight: 1.1 kg
•
For RWSS9500
Power supply rating: 110-240V; ~50-60 Hz
•
Total output power: 300 W (RMS)
•
Power consumption: 40 W
•
Standby power consumption: 0.45 W
•
Frequency response: 150 Hz ~ 20 kHz
•
S/N Ratio: 65 dB (A-Weighted)
•
Distortion: 1%
•
Dimensions (WxHxD): 265 x 116 x 106
•
(mm)
Weight: 1.4 kg
Weight: 1.4 kg
•
Wireless transmitter
Wireless transmitter
Frequency response: 5.8 GHz
•
Dimensions (WxHxD): 55 x 53 x 33 (mm)
•
Weight: 0.05 kg
•
3 Troubleshooting
Follow these steps within twenty seconds if
there is no sound from the rear speakers and
the indicator on the wireless receiver blinks
continuously for more than one minute.
For home theater with Blu-ray
there is no sound from the rear speakers and
the indicator on the wireless receiver blinks
continuously for more than one minute.
For home theater with Blu-ray
1
Disconnect the power cord from the
wireless receiver for a few seconds and
connect it back again.
connect it back again.
2
Switch to either AUX source or MP3 link
source.
3
Press and hold for three seconds.
‘PAIRING’ blinks and then ‘PAIRED’ is
»
displayed.
4
If ‘FAILED’ is displayed, repeat steps 1 to 3.
For other home theater s
1
Disconnect the power cord from the
wireless receiver for a few seconds and
connect it back again.
connect it back again.
2
Press
.
3
Press
INFO .
A screen is displayed.
»
4
Press
1 , then press SURR within ve
seconds.
‘PAIRING SUCCESS’ is displayed.
»
5
If ‘PAIRING FAIL’ is displayed, repeat steps 1
to 4.
English
EN
1_RWSS5510_9500_00_EN-US_v3.indd Sec1:5
4/14/2010 4:10:39 PM