ONKYO SKF-330XF Manual Do Utilizador

 

4

 

A

 

To turn on the SKW-150X, set the POWER switch 
to the ON position (the indicator lights up).
To turn off the SKW-150X, set the POWER switch 
to the OFF position (the indicator goes out).

Red:

 The unit is in standby mode

Green:  The unit is in operation mode

If the power is turned on, the SKW-150X automati-
cally enters Operational mode when a signal is input.
The SKW-150X automatically returns to Standby 
mode when no signal has been input for a while.

 

B

 

This control is used to adjust the output level of the 
subwoofer.

 

C

 

The RCA input should be connected to the sub-
woofer preout on your AV receiver, amp, or other 
receiver with supplied RCA cable.

 

The Auto Standby function turns the subwoofer on when the input signal exceeds a certain level. If the Auto Standby 
function does not work reliably, try slightly increasing or decreasing the subwoofer output level on your receiver or amp.

 

A

 

These push terminals are for connecting the speaker 
to your AV Receiver, amp, or other receiver with the 
supplied speaker cables. The supplied speaker 
cables are color-coded for easy identification. Sim-
ply connect each cable to the same-colored positive 
speaker terminal.

 

B

 

These keyhole slots can be used to wall-mount the 
speaker.

 

C

 

These threaded inserts can be used to attach the 
speaker to a speaker mount or bracket.

 

Use commercially available 5 mm screws to attach 
the speaker to a speaker mount or bracket.

 

We recommend using the provided rubber stoppers to achieve the best possible sound from your speakers. The rubber 
stoppers prevent the speakers from moving, providing a more stable setup.

2

3

1

■ Rear

To AC outlet

3

2

1

3

2

1

Rubber stoppers

Bottom of the

SKF-330XF/
SKM-330XS

Bottom of the

SKC-330XC

75 mm

175 mm