ONKYO SKS-HT520 Manual Do Utilizador

7

■ Powered Subwoofer (SKW-520)

Type:

Bass-reflex

Input sensitivity/impedance:

330 mV / 100 k

Ω

Maximum output power:

220 W (Dynamic Power)

Frequency response: 

25 Hz–150 Hz

Cabinet capacity:

1.35 cubic feet (38.5 L)

Dimensions (W 

×

 H 

×

 D):

10-13/16" 

×

 20-3/8" 

×

 16-3/16" 

(275 

×

 518 

×

 411 mm)

Weight:

30 lbs. (13.6 kg)

Drivers unit:

10 inch Cone Woofer

Power supply:

AC 120 V, 60 Hz

Power consumption: 

150 W

Other:

Auto Standby function

■ Front Speaker (SKF-520F)

Type:

2 Way Bass-reflex

Impedance:

8 

Ω

Maximum input power:

130 W

Output sound pressure level:

87 dB/W/m

Frequency response:

55 Hz–50 kHz

Crossover frequency:

4.5 kHz

Cabinet capacity:

0.38 cubic feet (10.8 L)

Dimensions (W 

×

 H 

×

 D):

7-7/16" 

×

 16-1/2" 

×

 9-5/16"

 

(189 

×

 419 

×

 236 mm)

Weight:

12.1 lbs. (5.5 kg)

Drivers unit:

5-1/4 inch OMF Cone 
Woofer 

×

 2

1 inch Balanced Dome

Terminal:

Color-coded push type

Other:

Magnetic shielding

■ Center Speaker (SKC-520C)

Type:

2 Way Bass-reflex

Impedance:

8 

Ω

Maximum input power:

130 W

Output sound pressure level:

85 dB/W/m

Frequency response:

60 Hz–50 kHz

Crossover frequency:

4,5 kHz

Cabinet capacity:

0.27 cubic feet (7.7 L)

Dimensions (W 

×

 H 

×

 D):

15-1/4" 

×

 6-3/16" 

×

 7-15/16" 

(387 

×

 157 

×

 202 mm) 

Weight:

8.2 lbs. (3.7 kg)

Speaker:

4 inch OMF Cone Woofer 

×

 2

1 inch Balanced Dome

Terminal:

Color-coded push type

Other:

Magnetic shielding

■ Surround Speaker (SKM-520S/SKB-520)

Type:

2 Way Bass Reflex

Impedance:

8 

Ω

Maximum input power:

130 W

Output sound pressure level:

82 dB/W/m

Frequency response:

60 Hz–50 kHz

Crossover frequency:

5 kHz

Cabinet capacity:

0.09 cubic feet (2.7 L)

Dimensions (W 

×

 H 

×

 D):

6-7/8" 

×

 10-7/16" 

×

 4-15/16"

 

(175 

×

 265 

×

 125 mm)

Weight:

3.7 lbs. (1.7 kg)

Speaker:

4 inch Cone Woofer
1 inch Balanced Dome

Terminal:

Color-coded push type

Specifications and appearance are subject to change 
without prior notice.

The speaker cables are not connected properly.

Check the speaker cables and correct as necessary.

The speaker configuration is not set correctly.

Check the speaker configuration.

The power plug is not fully inserted into the wall 
outlet.

Insert the power plug fully into the wall outlet.

The OUTPUT LEVEL control is set to minimum.

Turn up the OUTPUT LEVEL control.

The RCA cable is not properly connected to the 
subwoofer’s LINE INPUT.

Make sure that the RCA cable is properly connected to 
the subwoofer’s LINE INPUT.

The level of the input signal was too low and the 
subwoofer entered Standby mode.

Slightly increase the subwoofer pre out output level on 
your AV receiver.

The Subwoofer configuration is not set correctly.
For HT-R520 speaker package:

The subwoofer setting is set to No in the 
speaker configuration on the HT-R520.

Check the subwoofer setting in the speaker configura-
tion on your AV receiver.

The source material contain little or no bass con-
tent.

Choose source material with more bass content.

The RCA cable is not properly connected to the 
subwoofer’s LINE INPUT.

Make sure that the RCA cable is properly connected to 
the subwoofer’s LINE INPUT.

External interference from a TV or other elec-
tronic device is being picked up.

Move the subwoofer and RCA cable away from the 
interference source. Make sure your audio system is 
grounded properly.

HTP-520_En.fm Page 7 Tuesday, February 17, 2004 9:42 AM