Sony LBT-GTZ4I Manual Do Utilizador

Press ENTER.
Transferring starts when “DON’T 
REMOVE” appears in the display.

Press x.

Press REC TO 

.

“NEW TRACK” appears in the display.
If you press REC TO 

 again after a 

few seconds, a new MP3 file cannot be 
created.

Press PC (or press FUNCTION 
(RM-AMU053) or FUNCTION +/– 
(RM-AMU054) on the remote 
repeatedly until PC function is 
selected).

Press REC TO 

.

Press ENTER.

Start singing or speaking into the 
microphone.

When a new MP3 file is created, transferring is 
disabled for the time being.

• If distortion happen during transferring, 

reduce the microphone level.

• A new MP3 file is created automatically after 

approximately 1 hour of transferring.

• Transferring stops automatically when you 

change the function or tuner band.

You can easily transfer the audio files 
from an USB device to another USB 
device.

(RM-AMU053) or press 
FUNCTION +/– (RM-AMU054) 
repeatedly on the remote) to 
select the USB function. 
Press USB SELECT on the remote 
repeatedly to select “USB A”.

Press PLAY MODE on the 
remote repeatedly in stop mode 
to select the play mode.
The play mode automatically changes 
to 1 USB if you start transferring in 
ALL USB, ALL USB SHUF, 1 USB 
SHUF or PGM mode (when no file is 
programmed).
The play mode automatically changes 
to 

 if you start transferring in 

 

SHUF mode.
For details about the play mode, see 
“To change the play mode” (page 27).

USB device