Samsung MXFS8000ZA Manual Do Utilizador

English

English

•  If the Bluetooth device has failed to pair with the 

product, delete the previous “[Samsung] HI-FI XXXXXX” 
found by the Bluetooth device and have it search for 
the product again.

5.  Play music on the connected device.

•  You can listen to the music playing on the connected 

Bluetooth device over the Hi-Fi Component system.

•  In 

Bluetooth

 mode, some model's Play/Repeat/Stop/

Next/Back functions are not available.

 

➣

 The product only supports Middle Quality SBC data (up 

to 237kbps@48kHz), and does not support High Quality 

SBC data (328kbps@44.1kHz).

•  The AVRCP feature is not supported.
•   Connect only to a Bluetooth device that supports the 

A2DP (AV) function.

•   You cannot connect to a Bluetooth device that 

supports only the HF (Hands Free) function.

•  Only one Bluetooth device can be paired at a time.
•  Once you have turned off the Hi-Fi Component and 

pairing is terminated, pairing will not be restored 
automatically. To reconnect, you must pair the device 
again.

•  The Hi-Fi Component system may not search or 

connect properly in the following cases:

 - If there is a strong electrical field around Hi-Fi 

Component.

 - If several Bluetooth devices are simultaneously paired 

with Hi-Fi Component.

 - If the Bluetooth device is turned off, not in place, or 

malfunctions.

•  Note that such devices as microwave ovens, wireless 

LAN adaptors, fluorescent lights, and gas stoves use 
the same frequency range as the Bluetooth device, 
which can cause electric interference.

To disconnect the Bluetooth device from 
the Hi-Fi Component

You can disconnect the Bluetooth device from the 

Hi-Fi Component. For instructions, see the  

Bluetooth device's user manual.

•  The Hi-Fi Component will be disconnected.
•  When the Hi-Fi Component is disconnected from the 

Bluetooth device, the Hi-Fi Component will display 
DISCONNECTED ➞ READY on the its display.

To disconnect the Hi-Fi Component 
from the Bluetooth device

Press the CD/Bluetooth button on the front panel 

of the Hi-Fi Component to switch from Bluetooth 

mode to another mode or turn off the Hi-Fi Compo-

nent.

•  The connected Bluetooth device will wait a certain amount 

of time for a response from the Hi-Fi Component before 
terminating the connection. (Disconnection time may differ, 
depending on the Bluetooth device)

•  The currently connected device will be disconnected.

 

➣

  In Bluetooth connection mode, the Bluetooth connection

 

will be lost if the distance between the Hi-Fi Component 
and the Bluetooth device exceeds 16.25 feet (5 meters).

•  If the Bluetooth device comes back into the effective 

range after disconnecting, you can restart the Hi-Fi 
Component to restore the pairing with the Bluetooth 
device.

•  The Hi-Fi Component automatically turns off after 25 

minutes in the Ready mode.

You can use the MY Karaoke function to sing 

along with your favorite CDs and USB tracks.

1.  Connect the microphone to the MIC jack on the front 

of the product.

 

If your microphone plug is larger than the 3.5 mm 
MIC jack, you need a Connector-Adaptor (not 
supplied) to complete the connection.

 -

First, connect the Connector-Adaptor to the MIC jack 

on the front of the product,

 -

Second, connect the microphone (with larger jack) to 
the Connector-Adaptor.

2.  Press the MIC VOL-, + button on the remote 

control to adjust the volume of the microphone.

3.  Press the MY KARAOKE button on the remote 

control to suppress the vocal if you need. Each time 
the button is pressed, the selection is changed as 
follows:  
MY KARAOKE ON ➞ MY KARAOKE OFF 

 

If you hear strange noises (squealing or howling) 
while using the Karaoke feature, move the 
microphone away from the speakers. Turning down 
the microphone's volume or the speaker volume is 
also effective. Do not aim the MICROPHONE 
towards the SPEAKERS.

 

The microphone does not operate in the AUX and 
TUNER mode.

 

If you connect a microphone, GIGA SOUND 
automatically turns off. To turn Giga Sound back on, 
you must remove the microphone, and then press 
the Giga Sound button.

MX-FS8000-ZA-ENG_130401.indd   12

2013-04-01   �� 2:24:39