iLive 1407-0603-09 Manual Do Utilizador

iLive | IS809B

OPERATIONS

Setting the Clock

Setting the Sleep Timer

Using the Wireless Remote

Using the Auxiliary Input

Setting the Timer

1. Press and hold the Time Set button.
2. While holding the Time Set button, press the

Skip/Search buttons to adjust the hour and

minute.

3. Release the Time Set button to set the adjusted

time.

1. Press the Sleep button repeatedly to adjust the

sleep timer between 60 and 10 minutes, in 10

minute increments.
When the set amount of time has expired, the

unit will power off.

The included remote is wireless and does not

require line-of-sight to control the unit.
The wireless remote can control the base station

from approximately half the distance of the

speaker reception. (Approximately 100ft line-of-

sight, or 45ft indoors)

Results will vary depending on the number and

size of obstructions between the base station

and the wireless remote.

The Volume buttons on the remote control will

adjust the master volume of the base station,

affecting all linked speakers.

The included speakers have independent

volume controls that can be used to fine tune

the volume of the individual speakers.

Note: The speakers need to be paired with the unit

before any audio can be heard.
1. Connect a mini-phono 3.5mm cable (not

included) or a mini-phono 3.5mm cable-RCA

R/L audio cable (not included) to the Auxiliary

Input on the unit and the audio output/

headphone jack on an MP3 player, television,

or stereo system.

2. Turn the unit on by pressing the Power button.
3. Press the Source button to switch the unit to

Auxiliary mode.

4. Audio played through the connected MP3

player, television, or stereo system will now be

heard through the unit.

1. Press and hold the Timer button.
2. While holding the Timer button, press the

Skip/Search buttons to adjust the hour and

minute.

3. Release the Timer button to set the adjusted

timer.

4. Press the Source button to select iPod or

Auxiliary mode.
An iPod must be docked, or an audio source

must be connected to the Auxiliary input when

the set time is reached. Otherwise, no audio

will play when the set time is reached.

5. Press the Power button to turn the unit off.
6. Press the Timer button to activate the set timer.

“Timer On” will appear on the LCD display

when the timer is activated.
After the set time is reached, the base station

will power on.

IMPORTANT: The wireless speakers must be

powered on manually before the set time is

reached. The timer will not power on the paired

wireless speakers.

Audio Source

Required Connector

MP3 Player

mini-phono 3.5mm Cable (not

included)

Television

mini-phono 3.5mm Cable -

RCA R/L Audio Cable (not

included)

Stereo System

mini-phono 3.5mm Cable -

RCA R/L Audio Cable (not

included)