Eclipse - Fujitsu Ten AVN2227P Manual Do Utilizador

Página de 40
Before Asking for Repairs
Slight differences in operation can sometimes be mistaken for malfunctions, so check the following
table before asking for any repairs.
If the following fail to solve the problem, contact the place of purchase.
ERROR2
iPod SOFTWARE NOT 
SUPPORTED
・Make sure that the software 
for your iPod is the latest 
version.
・Make sure that your iPod 
model name is listed on the iPC-
107's manual (iPC-107 : Sold 
separately).
CAUTION
If a problem occurs, for instance when the main unit does not respond to any button operation, or
the display does not work correctly, press the [Reset] button using a paper clip or anything similar.
Pressing the [Reset] button will delete all the entries from memory. The settings will return to those
made at the factory prior to shipment.
Problem
Possible reason
Corrective action
The screen is dark for a brief 
period when the power is turned 
on at low temperatures.
This is a characteristic of LCDs.
This is not a malfunction. Wait 
for a brief period.
The display is distorted for a 
short while after the power is 
turned on.
This is a characteristic of LCD 
backlighting.
This is not a malfunction. The 
display will stabilize after a brief 
period. 
No sound comes out.
The volume is poorly adjusted or 
MUTE is on.
Turn the [VOL] rotary knob and 
check the volume. Or cancel 
MUTE.
The music is muted when the 
PND is attached to the main unit 
and when:
- voice guidance is given
- talking in hands-free mode*
This is not a malfunction. The 
music can be heard again when 
the voice guidance finishes or 
the hands-free mode is turned 
off.
Sound comes out of only one 
side (left or right, front or back).
A speaker wire is disconnected.
Check the connections of the 
speaker wires.
Volume is poorly adjusted.
Check the balance and fader 
adjustments. 
The sound quality does not 
change even after making 
adjustments.
The adjusted audio quality is not 
included in the radio broadcast 
or disc.
Check by changing the radio 
station or disc.
A CD will not go into the deck.
The power is not turned on.
Turn the vehicle ignition switch 
to [ACC] or [ON].
A disc is already inserted and 
you are trying to insert a second 
disc.
Eject the previously inserted CD 
and insert the preferred CD.
Messages
Cause
Corrective action