Kenwood TK-360 Manual Do Utilizador

2

n

  Select your desired zone and channel.

  Press the key programmed as Selcall or Selcall + Status.

  Press  /  (if the key assignment list selection is configured as “Enabled”) 

or <B/C> to select the ID of the station you want to call.

•  You can also enter the station ID directly by using the keypad.

  Press the PTT switch and begin your conversation.

•  You can also press 

n

 to page the ID, rather than talking.

n

  If enabled by your dealer, an alert tone will sound and the LED will blink when 

a Selcall has been received.  To respond to the call, press the PTT switch and 

speak into the microphone.

n

  An ID code is a combination of a 3-digit Fleet number and a 4-digit ID number.  

Each transceiver must have its own Fleet and ID number.

  The ID range may be limited by programming.

  Select your desired zone and channel.

  Press the key programmed as Paging Call to transmit your PTT List ID, to 

request a call.

Status messages are 2-digit codes ranging from 0 to  (0 ~  are reserved 

for special messages).
A maximum of 5 received messages can be stored in the stack memory of your 

transceiver and can be reviewed after reception.  The   icon appears when a 

message is stored in the stack memory. 

n

  If programmed by your dealer, you can press the Call 1 ~ Call 3 keys to 

quickly send preprogrammed status messages.  You can also manually send 

status messages.
1

  Select your desired zone and channel.

  Press the key programmed as Status or Selcall + Status.

•  When pressing the Status key, the target Fleet/ ID is fixed and cannot be 

selected.  Skip to step 5 to continue.

  In Selcall mode, press  /  (if the key assignment list selection is configured 

as “Enabled”) or <B/C> to select the ID of the station you want to call.

•  You can also enter the station ID directly by using the keypad.