Kenwood TK-8360 Manual Do Utilizador

You can add and remove zones and/or channels/group IDs to and from your scan 

list.
1 

Select your desired zone and/or channel/group ID.

  Press the key programmed as Scan Delete/Add to remove a channel or press 

and hold the key for approximately  second to remove a zone.

•  When a channel is added to scan, the 

 icon appears on the display.

•  When a zone is added to scan, the 

 icon appears on the display.

The Scan Revert channel is the channel selected when you press the PTT switch 

to transmit during scan.  Your dealer can program one of the following types of 

Scan Revert channels:

•  Selected:  The last channel selected before scan.

•  Selected + Talkback:  Same as “Selected”, plus you can respond to calls on the 

channel at which scan is paused.

•  Priority:  The Priority channel.

•  Priority + Talkback:  Same as “Priority”, plus you can respond to calls on the channel 

at which scan is paused.

•  Last Called + Selected:  The last channel on which you receive a call or the last 

channel selected before scan, whichever operation occured latest.

  To make DTMF calls, you must use an optional microphone with a DTMF keypad.

Press and hold the PTT switch.

  Enter the desired digits using the keypad.

•  If Keypad Auto-PTT is enabled by your dealer, you do not need to press the PTT 

switch to transmit; you can make the call simply by pressing the keys.

Autodial allows you to quickly call DTMF numbers that have been programmed 

onto your transceiver.
1

  Press the key programmed as Autodial.

  Press  /   (if the key assignment list selection is configured as “Enabled”) or 

/C> to select an autodial list number.

•  You can also enter a number from 0 ~ 6 directly using the keypad.

  Press the PTT switch to make the call.