Kenwood TK-8360 Manual Do Utilizador

  Press the key programmed as Selcall.

  Press  /  (if the key assignment list selection is configured as “Enabled”) or 

/C> to select the ID of the station you want to call.

•  You can also enter the station ID directly by using the keypad.

  Press the key programmed as Call 1 to Call 3 to begin your call.

Your dealer can program an ID number for your transceiver, to identify you to 

other parties when you make a call.  If set by your dealer, you can edit the ID.
1

  If the ID number can be edited, it will appear on the display when you turn the 

transceiver power ON.

  Press <B or C> to select the digit you want to change, then press  /  to increment/

decrement the number.

  Press S or   to complete the entry.

  Select your desired zone and channel.

  Press the key programmed as Selcall.

  Press <B or C> to select a digit, then press  /  to increment/decrement the 

number.

   Press S to complete the entry.

  Press the key programmed as Call 1 to Call 3 and begin your conversation.

  Additionally, you can also use the keys programmed as Digit 1x Down, Digit 1x Up, 

, and Digit 10x Up to adjust the Selcall number.  Digit 1x Up/Down increases/

decreases the Selcall number by  each time the key is pressed.  Digit 10x Up/Down increases/

decreases the Selcall number by 0 each time the key is pressed.

When you receive a signal containing the correct tones, squelch opens and you 

will hear the call.  To respond to the call, press the PTT switch and speak into the 

microphone.

FleetSync is an Alphanumeric 2-way Paging Function and is a protocol owned by 

 Corporation.

  If set up by your dealer, your transceiver may use the MDC-200 feature in place of 

FleetSync.  MDC-200 and FleetSync cannot be operated simultaneously.

A Selcall is a voice call to a particular station or to a group of stations.