Manualsbrain.com
  1. Manuais
  2. Marcas
  3. Kenwood
  4. KDC-X996
  5. Manual Do Utilizador

Kenwood KDC-X996 Manual Do Utilizador

Download
Página de 45
27
   
|
   
KDC-X996/ KDC-BT952HD
English
   
|
   
28
Getting Started of Bluetooth
Easy pairing function
1 
Enter easy pairing mode
Press the [
] button for at least 1 second.
Any of the following is displayed depending on 
Bluetooth device registration condition:
– “Searching”: When registering a Bluetooth device 
for the first time.
– “(Bluetooth device name)”: When a Bluetooth 
device has already been registered.
– “Device Full”: When maximum of five Bluetooth 
devices have already been registered.
When registering a Bluetooth device for the 
first time (Registering a Bluetooth device)
2 
“Searching” is displayed.
Search for the Bluetooth device.
When search is completed, “Finished” is displayed.
3 
Select a Bluetooth device name
Turn the [VOL] knob and press it when the 
desired item is displayed. 
4 
“Confirm Device” is displayed.
If “Pairing Success” is displayed, proceed to step 7.
If “PIN code is displayed, proceed to steps 5.
If “*** NG” is displayed, press the volume knob.
Proceed to steps 4.
5 
Input the PIN code
1. Turn the [VOL] knob and press it when the 
desired item is displayed.
  Select the digit.
2. Turn the [VOL] knob to select the numbers, 
and then press the [VOL] knob. 
6 
Transmit the PIN code
Press the [VOL] knob for at least 1 second.
If “Pairing Success” is displayed, registration is 
completed.
When “Confirm Device” is displayed, confirm 
connection with a Bluetooth device operation. 
7 
The receiver is connected to a Bluetooth 
device, with “HF CONNECT” or “AUDIO 
CONNECT” displayed, and exits the easy 
pairing mode.
⁄
•  If an error code is displayed during paring, see
When a Bluetooth device has already been 
registered, or maximum of five Bluetooth 
devices have already been registered/ selecting 
a Bluetooth device
2 
“(Bluetooth device name)” or “Device Full” is 
displayed.
3 
Select a Bluetooth device name
Turn the [VOL] knob.
 
✍
To register a new Bluetooth device, select 
“Device Search”, then go to <When registering a 
Bluetooth device for the first time>.
4 
Press the [VOL] knob.
5 
Select the profile for the device to connect
Turn the [VOL] knob.
 
✍
“HF” (HFP), “AUD” (A2DP), or “H&A” (HFP and A2DP) 
indicates the corresponding profile. 
6 
Set up the Bluetooth device name
Press the [VOL] knob.
“✱H✱A (device name)”:  The selected Bluetooth 
device is busy.
“-H-A (device name)”:  The selected Bluetooth 
device is on standby.
“  “ (blank) (device name):  The Bluetooth device is 
deselected.
 
✍
If a Bluetooth device is already selected, deselect 
it, and then select a different one.
 
✍
“H” (HFP) or “A” (A2DP) indicates the corresponding 
profile.
7 
Exit easy pairing mode
Press the [
] button.
Deleting the registered Bluetooth device
2 
“(Bluetooth device name)” or “Device Full” is 
displayed.
3 
Select a Bluetooth device name
Turn the [VOL] knob.
4 
Delete the selected Bluetooth device
Press the [VOL] knob for at least 2 seconds.
VOL
SRC
5 
Turn the [VOL] knob and press it when the 
desired item is displayed. 
Select “YES”.
Registering from Bluetooth devices 
(Pairing)
To make your Bluetooth device (cell-phone) usable 
with this unit, you need to register it (pairing). You 
can register up to 5 Bluetooth devices to this unit.
1 
Turn on this unit
Press the [SRC] button.
2 
Start registering this unit by operating the 
Bluetooth device.
By operating the Bluetooth device, register the 
hands-free unit or audio unit (pairing). Select 
“KENWOOD BT CD/R-6P1” from the list of found 
units. 
3 
Enter a PIN code
Input the PIN code (“0000”) in the Bluetooth 
device.
Check that registration is complete on the 
Bluetooth device. 
 
✍
PIN code is set to “0000” as the default. You can
change this code. Refer to 
.
4 
By operating the Bluetooth device, start 
hands-free connection.
⁄
•  If there are 5 or more Bluetooth devices registered, you
cannot register a new Bluetooth device.