Manualsbrain.com
  1. Manuais
  2. Marcas
  3. Kenwood
  4. KDC-X996
  5. Manual Do Utilizador

Kenwood KDC-X996 Manual Do Utilizador

Download
Página de 45
57
   
|
   
KDC-X996/ KDC-BT952HD
English
   
|
   
58
Bluetooth Setup
Registering Bluetooth Device 
(Pairing)
To make your Bluetooth device usable with this 
unit, you need to register it (pairing). You can 
register up to 5 Bluetooth devices to this unit.
Registering from Bluetooth devices
1 
Turn on this unit
Press the [SRC] button.
2 
Start registering this unit by operating the 
Bluetooth device
By operating the Bluetooth device, register the 
hands-free unit (pairing). Select “KENWOOD BT 
CD/R-6P1” from the list of connected units.
3 
Enter a PIN code
Input the PIN code (“0000”) in the Bluetooth 
device.
Check that registration is complete on the 
Bluetooth device. 
 
✍
PIN code is set to “0000” as the default. You can
change this code. Refer to 
4 
By operating the Bluetooth device, start hands-
free connection.
Registering from this unit
1 
Enter Bluetooth mode
Press the [
] button.
 
✍
You can also select from “Settings” in Menu List 
mode.
2 
Enter Bluetooth device registration mode
Turn the [VOL] knob and press it when the 
desired item is displayed. 
Select “BT Settings”
 > 
“Pairing”
 > 
“Device 
Regist.”.
Search for the Bluetooth device.
When search is completed, “Finished” is displayed.
3 
Select a Bluetooth device
Turn the [VOL] knob and press it when the 
desired item is displayed. 
4 
Input the PIN code
1. Turn the [VOL] knob and press it when the 
desired item is displayed.
  Select the digit.
2. Turn the [VOL] knob to select the numbers, 
and then press the [VOL] knob. 
5 
Transmit the PIN code
Press the [VOL] knob for at least 1 second.
If “Pairing Success” is displayed, registration is 
completed.
 
✍
If the error message appears even though the 
PIN code is correct, try <Registering Special 
Bluetooth device>.
6 
Return to the device list
Press the [MENU] button.
7 
Exit BT Settings mode
Press the [
] button.
⁄
•  This unit allows up to eight digits to be input for a PIN
code. If a PIN code cannot be input from this unit, it can 
be input from the Bluetooth device.
•  If there are 5 or more Bluetooth devices registered, you
cannot register a new Bluetooth device.
Registering Special Bluetooth device
Allow registration of a special device that cannot be 
registered normally (pairing).
1. Select Special device registration mode
Turn the [VOL] knob and press it when the 
desired item is displayed. 
Select “BT Settings” > “Pairing” > “SPCL DVC 
Select”.
2. Enter Special device registration mode
Press the [VOL] knob.
A list is displayed.
3. Select a device name
Turn the [VOL] knob and push the center when 
the desired device name is displayed.
If “Completed” is displayed, registration is 
completed.
4. Go through the procedure step 3 of 
<Registering from this unit> and complete 
the registration (pairing).
Cancelling Special device registration mode
Press the [MENU] button for at least 1 second.
⁄
•  If the device name is not in the list, select “Other Phones”.
Selecting the Bluetooth device You 
Wish to Connect
When two or more Bluetooth devices have already 
been registered, you need to select the Bluetooth 
device you wish to use.
1 
Enter Bluetooth mode
Press the [
] button.
 
✍
You can also select from “Settings” in Menu List 
mode.
2 
Select Bluetooth device selection mode
Turn the [VOL] knob and press it when the 
desired item is displayed. 
Cell-phone
Select “BT Settings”
 > 
“Pairing”
 > 
“Phone 
Selection”.
Audio player
Select “BT Settings”
 > 
“Pairing”
 > 
“Audio 
Selection”.
3 
Enter Bluetooth device selection mode
Press the [VOL] knob.
“(name)” is displayed.
4 
Select the Bluetooth device
Turn the [VOL] knob.
5 
Set up the Bluetooth device
Press the [VOL] knob.
“✱(name)” or “-(name)” is displayed.
“✱”:  The selected Bluetooth device is busy.
“-”:  The selected Bluetooth device is on standby.
“  “ (blank):  The Bluetooth device is deselected.
6 
Exit BT Settings mode
Press the [
] button.
⁄
•  If a Bluetooth device is already selected, deselect it, and
then select a different one.
Registering PIN Code
By operating the Bluetooth device, specify the PIN 
code necessary for registering this unit. 
1 
Enter Bluetooth mode
Press the [
] button.
 
✍
You can also select from “Settings” in Menu List 
mode.
2 
Enter PIN code edit mode
Turn the [VOL] knob and press it when the 
desired item is displayed. 
Select “BT Settings”
 > 
“Detailed Setup”
 > 
“PIN 
Code Edit”.
The current setting of PIN code is displayed.
3 
Input the PIN code
1. Turn the [VOL] knob and press it when the 
desired item is displayed.
  Select the digit.
2. Turn the [VOL] knob to select the numbers, 
and then press the [VOL] knob. 
4 
Register a PIN code
Press the [VOL] knob for at least 1 second.
If “Completed” is displayed, registration is 
completed.
5 
Exit BT Settings mode
Press the [
] button.
⁄
•  By default, “0000” is specified.
•  A PIN code can be specified with up to eight digits.