Kenwood KDC-X796 Manual Do Utilizador
English
17
■
■
To register a new Bluetooth device,
select “[NEW DEVICE]”, then go to “When
registering a Bluetooth device for the first
time.”
select “[NEW DEVICE]”, then go to “When
registering a Bluetooth device for the first
time.”
4
Press the volume knob.
5
Turn the volume knob to select the
profile for the device to connect.
profile for the device to connect.
■
■
“HANDSFREE”/ ”AUDIO”: The device can
be connected using either a hands-free
or audio profile.
“HF/AUD”: The device is can be connected
using both hands-free and audio profiles.
be connected using either a hands-free
or audio profile.
“HF/AUD”: The device is can be connected
using both hands-free and audio profiles.
6
Press the volume knob to set up the
Bluetooth device.
Bluetooth device.
■
■
“✱H✱A (device name)”: The selected
Bluetooth device is busy.
Bluetooth device is busy.
■
■
“-H-A (device name)”: The selected
Bluetooth device is on standby.
Bluetooth device is on standby.
■
■
“ H A (device name)”: The Bluetooth
device is deselected.
device is deselected.
• “H” (HFP) or “A” (A2DP) indicates the
corresponding profile.
7
Press to exit easy pairing mode.
Deleting the registered Bluetooth device
2
“(device name)” or “DEVICE FULL” is
displayed.
displayed.
3
Turn the volume knob to select a
Bluetooth device name.
Bluetooth device name.
4
Press and hold the volume knob to delete
the selected Bluetooth device.
“DELETE” is displayed.
the selected Bluetooth device.
“DELETE” is displayed.
5
Turn the volume knob to select “YES”,
then press to confirm.
“COMPLETED” is displayed.
then press to confirm.
“COMPLETED” is displayed.
6
Press to exit easy pairing mode.
Registering from Bluetooth devices
(Pairing)
1
Press SRC to turn on the power.
2
Start registering this unit by operating
the Bluetooth device.
By operating the Bluetooth device, register
the hands-free unit or audio unit (pairing).
Select “KENWOOD BT CD/R-6P1” from the
list of found units.
the Bluetooth device.
By operating the Bluetooth device, register
the hands-free unit or audio unit (pairing).
Select “KENWOOD BT CD/R-6P1” from the
list of found units.
3
Input the PIN code (“0000”) in the
Bluetooth device.
Check that registration is complete on
the Bluetooth device. PIN code is set to
“0000” as the default. You can change this
code. Refer to [PIN CODE EDIT] under
<Bluetooth Setup> (page 23).
Bluetooth device.
Check that registration is complete on
the Bluetooth device. PIN code is set to
“0000” as the default. You can change this
code. Refer to [PIN CODE EDIT] under
<Bluetooth Setup> (page 23).
4
By operating the Bluetooth device, start
hands-free connection.
hands-free connection.
■
■
If there are 5 or more Bluetooth devices
registered, you cannot register a new
Bluetooth device.
registered, you cannot register a new
Bluetooth device.
About the Cell-Phone
■
■
Version: Bluetooth Standard Ver. 3.0
Certified
Certified
■
■
Profile:
HFP (Hands Free Profile)
HSP (Headset Profile)
SPP (Serial Port Profile)
OPP (Object Push Profile)
PBAP (Phone book Access Profile)
A2DP (Advanced Audio Distribution Profile)
AVRCP (Audio/Video Remote Control
Profile)
HFP (Hands Free Profile)
HSP (Headset Profile)
SPP (Serial Port Profile)
OPP (Object Push Profile)
PBAP (Phone book Access Profile)
A2DP (Advanced Audio Distribution Profile)
AVRCP (Audio/Video Remote Control
Profile)
For the cell-phones verified for compatibility,
access the following URL:
www.kenwood.com/cs/ce/bt/
access the following URL:
www.kenwood.com/cs/ce/bt/
■
■
The units supporting the Bluetooth
function have been certified for conformity
with the Bluetooth Standard following the
procedure prescribed by Bluetooth SIG.
However, it may be impossible for such
units to communicate with your cell-
phone depending on its type.
function have been certified for conformity
with the Bluetooth Standard following the
procedure prescribed by Bluetooth SIG.
However, it may be impossible for such
units to communicate with your cell-
phone depending on its type.
B64-4935-00_01_K.indb 17
11/12/21 9:39