Kenwood KMR-550U Manual Do Utilizador

|

KDC-X896/ KDC-BT852HD/ KDC-X496/ KDC-452U/ KMR-550U

English

   

|

   

•  The CD is quite dirty. The CD is upside-down. The CD is 

scratched a lot.

•  The disc is unreadable.

•  The CD player section is not operating properly.

➪

Reinsert the CD. If the CD cannot be ejected or the 
display continues to blink even when the CD has 
been properly reinserted, please switch off the power 
and consult your nearest service center.

•  The speaker wire has short-circuited or touched the 

chassis of the vehicle, and then the protection function 
has been activated.

➪

Lay or insulate the speaker cable properly and press 
the Reset button. If “Protect” does not disappear, 
consult your nearest service center.

•  An Audio file is played in a format that is not supported 

by this unit.

•  A copy-protected file is played.

•  The file system of the connected USB device is broken.

➪

Copy the files and folders for the USB device again. If 
“Read Error” is still displayed, initialize the USB device 
or use another USB device.

•  A USB device is selected as a source although no USB 

device is connected. 

➪

Change the source to any source other than the 
USB device. Connect an USB device, and change the 
source to the USB device again.

•  An unsupported USB device is connected.
•  Connection to the iPod has failed.

➪

Check that the connected iPod is supported. See 

 for information 

on supported iPods.

•  The connected USB device contains no playable audio 

file.

•  A medium that does not have playable data has been 

played.

•  Connection to the iPod has failed.

➪

Remove the USB device and then reconnect it.

➪

Reset iPod/ iPhone.

•  The calling party does not notify a caller ID.
•  There is no phone number data.

•  There is no outgoing call list.
•  There is no incoming call list.
•  There is no missed call list.
•  There is no phone book list.

•  The cell-phone has not been registered (pairing).

•  The unit cannot communicate with the cell-phone.

•  The unit cannot communicate with the Bluetooth audio 

player.

•  The memory cannot be accessed.

➪

Cycle the power switch. If this message still appears, 
press the Reset button on the control unit. 

•  The unit cannot communicate with the cell-phone.

➪

Cycle the power switch. If this message still appears, 
press the Reset button on the control unit. 

•  Update of the firmware has failed.

➪

Retry update of the firmware.

•  The Bluetooth device cannot be detected.

•  5 Bluetooth device have already been registered. No more 

Bluetooth devices is registered.

•  The PIN code is wrong.

•  The unit cannot be connected to the device.

•  Pairing error.

•  No voice tags are registered in your cell-phone.

•  Data is not contained in the phone book. 

•  No short message in In Box.

•  SMS could not be sent.

•  The tag memory of HD Radio tuner and SiriusXM tuner 

is FULL.

•  The iPod memory is FULL.

•  An iPod which does not support the tag memory has 

been connected.

•  Registration in Bookmark has failed. 

•  Deletion of the station has failed. 

•  Registration of the station has failed. 

•  The number of registered stations has reached the upper 

limit. 

➪

Retry after deleting an unnecessary station. 

•  Registration of Thumbs Up/Down has failed. 

•  Keyword search has failed. 

•  There is no receivable station. 

•  No more skips are allowed now.

➪

Retry after a while. 

•  Any device ready for Pandora internet radio reception is 

not connected to this unit. 

•  The connected Bluetooth device does not support a 

voice recognition function. 

•  Any Bluetooth device supporting a voice recognition 

function is not connected. 

•  A SiriusXM tuner is not connected to this unit. 

➪

Check that the connected SiriusXM tuner is 
connected.

•  The SiriusXM subscription has been renewed. 

➪

Pressing the Control knob will clear the error 
message. 

•  The currently selected channel is unavailable. 

•  The currently selected channel is not subscribed to. 

•   The entered pass code is incorrect. 

•  No antenna is connected to the SiriusXM tuner.

➪

Check that an antenna is connected to the SiriusXM 
tuner.

•  No SiriusXM radio signal is received. 

➪

Check that an antenna is connected to the SiriusXM 
tuner.

•  The number of Alert content has reached the upper limit.

➪

Retry after deleting unnecessary Alert content. 

•  The song you attempted to register as Alert content has 

already been registered. 

•  The artist you attempted to register as Alert content has 

already been registered.

•  The content currently being received cannot be 

registered as a content alert item regardless of whether its 
artist or song name is stored.