Kenwood KDC-MP825 Manual Do Utilizador

|

English

✔  The car antenna is not extended.

☞  Pull the antenna out all the way.

✔  The antenna control wire is not connected.

☞  Connect the wire correctly, referring to the 

section on 'Connecting Wires to Terminals'.

Direct Access Tuning.
✔  A station that can’t be received is being entered.

☞  Enter a station that can be received.

✔  You’re trying to enter a frequency with a 0.01 MHz 

unit.
☞  What can be designated in the FM band is to 

0.1 MHz.

External disc control mode.
✔  Unsupported disc changer is connected.

☞  Use the disc changer mentioned in the 

'About CD players/disc changers connected 
to this unit' (page 5) of the section on 'Safety 
precautions'.

plays instead.
✔  The specified CD is quite dirty.

☞  Clean the CD.

✔  The disc is loaded in a different slot from that 

specified.
☞  Eject the disc magazine and check the 

number for the specified disc.

✔  The disc is severely scratched.

☞  Try another disc instead.

✔  The CD is quite dirty.

☞  Clean the CD, referring to the CD cleaning of 

the section on 'About CDs' (page 7).

✔  The cause is that more than 10 minutes has 

elapsed since the vehicle ACC switch was turned 
OFF. 
☞  The disc can only be removed within 10 

minutes of the ACC switch being turned OFF. 
If more than 10 minutes has elapsed, turn 
the ACC switch ON again and press the Eject 
button. 

✔  There’s already another disc inserted.

☞  Press the [0] button and remove the disc.

✔  Another function is ON.

☞  Turn Random Play or other functions OFF.

✔  For the discs/folders first or last song.

☞  For each disc/folder, Track Search can’t be 

done in the backward direction for the first 
song or in the forward direction for the last 
song.

✔  The media is scratched or dirty.

☞  Clean the media, referring to the CD cleaning 

of the section on 'About CDs' (page 7).

played.
✔  The media is scratched or dirty.

☞  Clean the media, referring to the CD cleaning 

of the section on 'About CDs' (page 7).

✔  The recording condition is bad.

☞  Record the media again or use another media.

correctly.
✔  ---

☞  There are times when it isn’t displayed 

correctly according to the MP3/WMA 
recording conditions.

✔  The preset broadcast station is not transmitting 

in the mode that was set with 'Receive mode 
Setting' (page 35). 
☞  Please set 'Receive mode Setting' to "Auto". 

✔  In digital AM broadcasting, receive mode switches 

between stereo and monaural too often. 
☞  Receiving condition is bad or unstable. 

Stereo is chosen when receiving condition is 
good, and it switches to monaural when the 
condition becomes bad.

✔  HD Radio tuner is connected to KCA-S210A or 

other units.
☞  Connect the HD Radio tuner directly to the 

control unit.

Even though the disc changer is connected, the 
Disc Changer source is not ON, with "AUX EXT" 
showing in the display during the Changer Mode.

B64-2743-00_U.S(K).Indd   44

03.11.27, 4:52:09 PM