Kenwood KDC-MP728 Manual Do Utilizador
English
|
5
Notes
• If you experience problems during installation,
consult your Kenwood dealer.
• If the unit fails to operate properly, press the Reset
button. The unit returns to factory settings when
the Reset button is pressed.
the Reset button is pressed.
• Press the reset button if the disc auto changer fails
to operate correctly. Normal operation should be
restored.
restored.
• We recommend the use of <Security Code>
(page 42) to prevent theft.
• The characters which can be displayed by ISO
8859-1.
• The illustrations of the display and the panel
appearing in this manual are examples used to
explain more clearly how the controls are used.
Therefore, what appears on the display in the
illustrations may differ from what appears on
the display on the actual equipment, and some
of the illustrations on the display may represent
something impossible in actual operation.
explain more clearly how the controls are used.
Therefore, what appears on the display in the
illustrations may differ from what appears on
the display on the actual equipment, and some
of the illustrations on the display may represent
something impossible in actual operation.
Cleaning the Unit
If the faceplate of this unit is stained, wipe it with a
dry soft cloth such as a silicon cloth.
If the faceplate is stained badly, wipe the stain off
with a cloth moistened with neutral cleaner, then
wipe neutral detergent off.
dry soft cloth such as a silicon cloth.
If the faceplate is stained badly, wipe the stain off
with a cloth moistened with neutral cleaner, then
wipe neutral detergent off.
• Applying spray cleaner directly to the unit may affect its
mechanical parts. Wiping the faceplate with a hard cloth
or using a volatile liquid such as thinner or alcohol may
scratch the surface or erases characters.
or using a volatile liquid such as thinner or alcohol may
scratch the surface or erases characters.
Cleaning the Faceplate Terminals
If the terminals on the unit or faceplate get dirty,
wipe them with a dry, soft cloth.
wipe them with a dry, soft cloth.
Before using this unit for the first time
This unit is initially set on the Demonstration mode.
When using this unit for the first time, cancel the
<Demonstration mode Setting> (page 50).
When using this unit for the first time, cancel the
<Demonstration mode Setting> (page 50).
About ODD (Offset Dual Differential) D/A
System (KDC-X889/KDC-MP828)
System (KDC-X889/KDC-MP828)
The high quality sound play is to be done by ODD
D/A System. Dual D/A converters are built-in the
ODD D/A System, and the digital processing is
isolated and controlled separately for front channel
so the channel separation is improved sharply.
Also, it produces the data in which the sound data
is offset on the minus side and converts the two
signals (original and offset data) to the analog
signal, which has less noise and distortion, by the
synthetic process.
However, ODD D/A System has no effect during the
following conditions.
- When "2 ZONE" of <Audio Setup> (page 13) is
D/A System. Dual D/A converters are built-in the
ODD D/A System, and the digital processing is
isolated and controlled separately for front channel
so the channel separation is improved sharply.
Also, it produces the data in which the sound data
is offset on the minus side and converts the two
signals (original and offset data) to the analog
signal, which has less noise and distortion, by the
synthetic process.
However, ODD D/A System has no effect during the
following conditions.
- When "2 ZONE" of <Audio Setup> (page 13) is
"ON".
- When <Bypass Control> (page 17) is "Bypass".
Reset button
Reset button
B64-2962-00_K_r4_English.Indd 5
B64-2962-00_K_r4_English.Indd 5
04.11.11 0:39:13 PM
04.11.11 0:39:13 PM