Kenwood KDC-PS9018R Manual Do Utilizador
— 43 —
TEL MUTE
ILLUMI
EXT.
CONT.
P.CONT
+
+
+
+
FRONT • L
FRONT • R
REAR • L
REAR • R
–
+
NON
FADING
REAR
ANT
CONT
CONT
FRONT
Connecting Wires to Terminals
When only two speakers are being connected to the
system, connect the connectors either to both the
front output terminals or to both the rear output
terminals (do not mix front and rear). For example, if
you connect the + connector of the left speaker to a
front output terminal, do not connect the - connector
to a rear output terminal.
system, connect the connectors either to both the
front output terminals or to both the rear output
terminals (do not mix front and rear). For example, if
you connect the + connector of the left speaker to a
front output terminal, do not connect the - connector
to a rear output terminal.
2CAUTION
If you connect the ignition wire (red) and the battery
wire (yellow) to the car chassis (ground), you may
cause a short circuit, that in turn may start a fire.
Always connect those wires to the power source
running through the fuse box.
wire (yellow) to the car chassis (ground), you may
cause a short circuit, that in turn may start a fire.
Always connect those wires to the power source
running through the fuse box.
2WARNING
FM/AM antenna input
Rear left output (White)
Rear right output (Red)
Fuse (10A)
Wiring harness
(Accessory1)
(Accessory1)
White/Black
Gray/Black
Green/Black
Purple/Black
White
Gray
Green
Purple
To front left
speaker
speaker
To front right
speaker
speaker
To rear right
speaker
speaker
To rear left
speaker
speaker
Ignition wire (Red)
Battery wire (Yellow)
Ground wire (Black) - (To car chassis)
Ignition key
switch
switch
Car fuse
box
(Main fuse)
box
(Main fuse)
ACC
Car fuse box
Battery
If no connections are made, do not let the wire come out from the tab.
Front left output (White)
Front right output (Red)
Non-fading right output (Red)
Dimmer control wire (Orange / White)
To car light control switch
External amplifier control wire
(Pink / Black)
(Pink / Black)
To "EXT.AMP.CONT." terminal of the amplifier
having the external amp control function.
Non-fading left output (White)
Power control/Motor antenna control wire
(Blue/White)
(Blue/White)
TEL mute wire (Brown)
Connect to the terminal that is grounded when either
the telephone rings or during conversation.
To KENWOOD disc changer/
DAB control input/
KPA-SD100/KPA-HD100/KPA-SS100
DAB control input/
KPA-SD100/KPA-HD100/KPA-SS100
To connect these leads, refer to the
relevant instruction manuals.
relevant instruction manuals.
NOTE
Connect either to the power control terminal when
using the optional power amplifier, or to the antenna
control terminal in the vehicle.
KDC-PS9018R(M_E)_r3 2003.06.13 03:04 PM Page 43