Kenwood KDC-U7056DAB Manual Do Utilizador

|

KDC-U7056DAB/ KDC-U7056BT/ KDC-U7056BTL

English

   

|

   

# WARNING

To prevent injuries or a fire, take the following 
precautions:

•  Stop the car before operating the unit.
•  To prevent a short circuit, never put or leave any 

metallic objects (such as coins or metal tools) inside 

the unit.

! CAUTION

•  Adjust the volume so that you can hear the sound 

outside the car. Driving with the volume too high 

may cause an accident.

•  Wipe off the dirt on the panel with a dry silicon or 

soft cloth.
Failure to observe this precaution may result in 

damage to the monitor or unit.

•  If you experience problems during installation, 

consult your Kenwood dealer.

This unit is factory-set to operate in the 

Demonstration mode initially.
When using this unit for the first time, cancel 

the Demonstration mode. Refer to 

<Cancel the 

Demonstration mode> (page 9)

.

The unit may not function properly if the connectors 

between the unit and faceplate are dirty. Detach the 

faceplate and clean the connector with a cotton swab 

gently, being careful not to damage the connector.

When the car is air-conditioned, moisture may collect 

on the laser lens. This may cause disc read errors. In 

this case, remove the disc and wait for the moisture 

to evaporate.

If the unit fails to operate properly, press the Reset 

button. The unit returns to the factory settings when 

the Reset button is pressed.

•  When you purchase optional accessories, check with 

your Kenwood dealer to make sure that they can 

work with your model and in your area.

•  Characters that conform to ISO 8859-1 can be 

displayed.

•  To display characters in the following language, 

additional setting is required. 

 

Chinese

Refer to 

“Chinese”

 of 

<12-5. Initial settings> (page 

60)

.

Arabic

Persian

Thai

Refer to “TAG Language” of 

<12-5. Initial settings> 

(page 60)

.

•  The illustrations of the display and panel appearing 

in this manual are examples used to explain more 

clearly how the controls are used. Therefore, what 

appears on the display in the illustrations may differ 

from what appears on the display on the actual 

equipment, and some of the images on the display 

may be inapplicable.

The label is attached to the chassis/case and says 

that the component uses laser beams that have been 

classified as Class 1. It means that the unit is utilizing 

laser beams that are of a weaker class. There is no 

danger of hazardous radiation outside the unit.