Kenwood KDC-U553BT Manual Do Utilizador

English

Press   SRC to select a source other than “STANDBY”.

Press the volume knob to enter [FUNCTION] mode.

Turn the volume knob to select [AUDIO CONTROL] or [SETTINGS], then press to enter.

Turn the volume knob to make a selection, then press to confirm.

■

■

See table below for selection.

■

■

Repeat step 4 until the desired item is selected/activated.

■

■

Press   to return to the previous item.

Hold   to finish the procedure.

[AUDIO CONTROL] : While listening to any source except in STANDBY state or Bluetooth mode.

SUB-W LEVEL

–15 — 0 * — +15: Adjusts the subwoofer output level.

BASS LEVEL

–8 — 0 * — +8: Source tone memory: Adjusts the level to memorize in each source. (Before making an 
adjustment, select the source you want to adjust.)

MID LEVEL
TRE LEVEL
EQ PRO

BASS ADJUST

BASS CTR FRQ

60/ 80/ 100 */ 200: Selects the center frequency.

BASS LEVEL

–8 — 0 — +8 *: Adjusts the level.

BASS Q FACTOR 1.00 */ 1.25/ 1.50/ 2.00: Adjusts the quality factor.
BASS EXTEND

ON *: Turns on the extended bass. ; OFF: Cancels.

MID ADJUST

MID CTR FRQ

0.5K/ 1.0K/ 1.5K/ 2.5K *: Selects the center frequency.

MID LEVEL

–8 — +2 * — +8: Adjusts the level.

MID Q FACTOR 0.75/ 1.00 */ 1.25: Adjusts the quality factor.

TRE ADJUST

TRE CTR FRQ

10.0K/ 12.5K */ 15.0K/ 17.5K: Selects the center frequency.

TRE LEVEL

–8 — +3 * — +8: Adjusts the level.

PRESET EQ

NATURAL/ USER/ ROCK/ POPS/ EASY/ TOP40/ JAZZ/ POWERFUL *: Selects a preset sound mode suitable 
to the music genre. (Selects [USER] to use the customized bass, middle, and treble settings.)

BASS BOOST

B.BOOST LV1 */ B.BOOST LV2/ B.BOOST LV3: Selects your preferred bass boost level. ; OFF: Cancels.

LOUDNESS

LOUDNESS LV1/ LOUDNESS LV2: Selects your preferred low and high frequencies boost to produce a well-
balanced sound at a low volume level. ; OFF *: Cancels.

BALANCE

L15 — 0 * — R15: Adjusts the left and right speaker output balance.

FADER

R15 — 0 * — F15: Adjusts the rear and front speaker output balance.

SUBWOOFER SET

ON *: Turns on the subwoofer output. ; OFF: Cancels.

DETAILED SET

HPF

THROUGH *: All signals are sent to the front speaker. ;  
100/ 120/ 150 (HZ): Frequencies lower than the specified value are cut off.

LPF 
SUBWOOFER

THROUGH *: All signals are sent to the subwoofer. ;  
85/ 120/ 160 (HZ): Frequencies higher than the specified value are cut off. 

SUB-W PHASE REVERSE (180°)/ NORMAL (0°) *: Selects the phase angle of the subwoofer output to be in line with the 

speaker output for optimum performance. (Selectable only if a setting other than [THROUGH] is selected for 
[LPF SUBWOOFER].)

B64-4920-00_02_M_English.indd   22

11/12/21   9:43