Kenwood KDC-BT60U Manual Do Utilizador
English
|
21
news bulletin volume is the same level that was set for
Traffic Information.
Traffic Information.
• Forced MONO
Strong electrical fields (such as from power lines) may
cause unstable sound quality when it is set to ON. In such
a situation, turn it OFF.
cause unstable sound quality when it is set to ON. In such
a situation, turn it OFF.
Station Preset Memory
Putting a station in the memory.
1
Select the radio band and tune in a desired
radio station you wish to store in the preset
memory
radio station you wish to store in the preset
memory
2
Enter Menu List mode
Press the [MENU] button.
Press the [MENU] button.
3
Enter Preset Memory mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “List & Memory”.
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “List & Memory”.
4
Select the number to put in the memory
Turn the [VOL] knob and press it for at least 2
seconds when the desired item is displayed.
Select preset number.
Turn the [VOL] knob and press it for at least 2
seconds when the desired item is displayed.
Select preset number.
Display
Overview
“List & Memory”
“-1”
Preset number 1.
“-2”
Preset number 2.
…
“-6”
Preset number 6.
Cancelling the Preset Memory mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
and then press it again briefly.
Auto Memory Entry
Putting stations with good reception in the memory
automatically.
automatically.
1
Select the radio band you wish to store in the
preset memory
preset memory
2
Enter Menu List mode
Press the [MENU] button.
Press the [MENU] button.
3
Enter Auto Memory Entry mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Settings”
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Settings”
>
“Auto Memory”.
4
Open Auto Memory Entry
Turn the [VOL] knob and press it when the
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “YES”.
When 6 stations that can be received are put in the
memory, auto memory entry closes.
Select “YES”.
When 6 stations that can be received are put in the
memory, auto memory entry closes.
Preset Tuning
Recalling the stations in the memory.
1
Select the radio band
2
Enter Menu List mode
Press the [MENU] button.
Press the [MENU] button.
3
Select a desired station in the memory
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “List & Memory”
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “List & Memory”
>
Preset number.
Function of remote control
Direct Access Tuning
Tuning in a desired radio station by entering the
frequency.
frequency.
1
Select the radio band
2
Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote
control.
“– – – –” is displayed.
Press the [DIRECT] button on the remote
control.
“– – – –” is displayed.
3
Enter the frequency
Press the number buttons on the remote
control.
Example:
Press the number buttons on the remote
control.
Example:
Desired frequency
Press button
92.1 MHz (FM)
[9], [2], [1]
810 kHz (AM)
[8], [1], [0]
4
Tune in to the entered frequency
Press the [
Press the [
4] or [¢] button.
Cancelling Direct Access Tuning
Press the [DIRECT] button on the remote
control.
control.
⁄
• You can enter the FM band frequency in steps of a
minimum of 0.1 MHz.