Kenwood KDC-BT60U Manual Do Utilizador
English
|
35
Theft Deterrent Faceplate
The faceplate of the unit can be detached and
taken with you, helping to deter theft.
taken with you, helping to deter theft.
Removing the Faceplate
1
Press the Release button.
Drop open the faceplate.
Drop open the faceplate.
2
Drawing the faceplate to left side pull it to
forward and remove it.
forward and remove it.
¤
• The faceplate is a precision piece of equipment and can
be damaged by shocks or jolts.
• Keep the faceplate in its faceplate case while detached.
• Do not expose the faceplate (and the faceplate case) to
• Do not expose the faceplate (and the faceplate case) to
direct sunlight or excessive heat or humidity. Also avoid
places with too much dust or the possibility of water
splashing.
places with too much dust or the possibility of water
splashing.
Reattaching the Faceplate
3
Align the shaft on the unit with the depression
on the faceplate.
on the faceplate.
4
Push the faceplate in until it clicks.
The faceplate is locked in place, allowing you to
use the unit.
The faceplate is locked in place, allowing you to
use the unit.
Demonstration mode Setting
Turning the demonstration mode ON/OFF.
1
Enter Menu List mode
Press the [MENU] button.
Press the [MENU] button.
2
Enter Demonstration mode setting
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “DEMO Mode”.
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “DEMO Mode”.
3
Set the Demonstration mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “ON” or “OFF”.
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “ON” or “OFF”.
4
Exit Menu List mode
Press the [MENU] button.
Press the [MENU] button.
Function of KDC-6047U
Muting volume upon reception of
Phone call
Phone call
The audio system automatically mutes when a call
comes in.
comes in.
When a call comes in
“CALL” is displayed.
The audio system pauses.
The audio system pauses.
Listening to the audio during a call
Press the [SRC] button.
The “CALL” display disappears and the audio system
comes back ON.
The “CALL” display disappears and the audio system
comes back ON.
When the call ends
Hang up the phone.
The “CALL” display disappears and the audio system
comes back ON.
The “CALL” display disappears and the audio system
comes back ON.
⁄
• To use the TEL Mute feature, you need to hook up the MUTE
wire to your telephone using a commercial telephone
accessory. Refer to
accessory. Refer to
.