Kenwood KDC-BT752HD Manual Do Utilizador
English
9
Adjust [SETTINGS] mode settings
While listening to the radio...
1
Press the volume knob to enter [FUNCTION] mode.
2
Turn the volume knob to select [SETTINGS], then press to enter.
3
Turn the volume knob to make a selection, then press to confirm.
See table below for selection.
See table below for selection.
4
Hold to finish the procedure.
Item
Selectable setting (Preset: *)
SEEK MODE
AUTO1 *: Automatically search for a station or channel. ; AUTO2: Search in the order of the stations in the preset
memory. ; MANUAL: Manually search for a station.
memory. ; MANUAL: Manually search for a station.
AUTO MEMORY YES: Automatically starts memorizing 6 stations with good reception. ; NO *: Cancels (automatic memorizing is
not activated). (Selectable only if [NORMAL] is selected for [PRESET TYPE].) (page 5)
RECEIVE MODE Sets the receive mode of the HD Radio receiver.
AUTO *: Automatically tunes to analog broadcast when there is no digital broadcast. ; DIGITAL: Tunes in to digital
broadcast only. ; ANALOG: Tunes in to analog broadcast only.
broadcast only. ; ANALOG: Tunes in to analog broadcast only.
TAG MEMORY Displays the tag memory usage of the HD Radio receiver.
00 — 50 (Preset: 00): Up to 50 tags can be registered to this unit.
Listening to the other external
components
PAR
iPod
VOICE
TAG
3.5 mm (1/8”) stereo mini plug
(commercially available)
(commercially available)
Portable audio device
(commercially available)
(commercially available)
Preparation : Make sure [ON] is selected for [BUILT-IN AUX]. (page 5)
Auxiliary input jack
1
Press SRC to select “AUX”.
2
Turn on the external component and
start playing.
start playing.
3
Turn the volume knob to adjust the
volume.
volume.
B64-4935-00_01_K.indb 9
11/12/21 9:39