Kenwood KDC-BT852HD Manual Do Utilizador

14   |   Quick Start Guide

Bend the tabs of the mounting sleeve 
with a screwdriver or the like and 
attach it in place.

⁄

•  Make sure that the unit is installed 

securely in place. If the unit is unstable, it 
may malfunction (for example, the sound 
may skip).

Remove the hard rubber frame with 
reference to <Removing the hard rubber 
frame>.

Align the holes in the unit (two locations 
on each side) with the vehicle mounting 
bracket and secure the unit with the 
accessory screws.

8 mm
 MAX.

ø5mm

ø5mm

8mm
 MAX.

T

N

T

N

T/N

T: Toyota cars 
N: Nissan cars

Accessory3...For Nissan car
Accessory4...For Toyota car

3

4

Engage the catch pins on the removal 
tool and release the two locks on the 
upper part of frame. 
Lift up and pull the frame forward as 
shown in the figure.

Catch

Lock

Removal tool (Accessory

2

)

When the upper part of frame is 
removed, remove the lower part of frame.

⁄

•  The frame can be removed from the 

bottom side in the same manner.

Remove the hard rubber frame with 
reference to <Removing the hard rubber 
frame>.

Remove the faceplate.

Insert the two removal tools deeply into 
the slots on both sides as shown.

Lower the removal tool toward the 
bottom, and then pull out the unit 
halfway while pressing the removal tool 
towards the inside.

Accessory

2

¤

•  Be careful to avoid injury from the catch 

pins on the removal tool.

Pull the unit all the way out with your 
hands, being careful not to drop it.

B59-2127-00_00_12Stepup_QSG_K.indb   14

11/12/19   11:35