Kenwood DNX6040EX Manual Do Utilizador

Set each item as follows.

Fader #/Balance #
Adjust the volume balance around the
touched area.
[

2] and [3] adjust the right and left volume

balance.
[

5] and [∞] adjust the front and rear volume

balance.
Volume Offset*
Finely adjust the volume of the current source
to minimize the difference in volume between
different sources.
Subwoofer Level
Adjusts the subwoofer volume. This setting is
not available when subwoofer is set to “None”.
See

Speaker setup (P.81)

Bass Boost
Sets the amount of bass boost among “OFF”/
“Step1”/ “Step2”.
Loudness

Turns the loudness control function on or
off. If turned on, high and low tones are
automatically enhanced during low volume.
Settable only when zone function

(P.87)

is set

to off.

* If you have increased the volume first, then

reduced the volume using the “Volume

Offset”, the sound generated if you

suddenly switch to another source may be

extremely loud.

Equalizer Control

You can adjust equalizer by selecting the

optimized setting for each category.
If you use

, you can also adjust

equalizer manually.

Touch [Equalizer].

Equalizer screen appears.

operation

Controlling EQ curves

Select EQ curve from [Natural],

[Rock], [Pops], [Easy], [Top40], [Jazz],
[Game], [iPod], and [User].

NOTE

• [iPod] is available only during iPod source.