Kenwood DNX6040EX Manual Do Utilizador

NOTE

• When the rear speaker sound is switched, the

audio source that is output at the AV OUTPUT
terminal is also switched to the same source.

• When the dual zone function is set to on, the

following functions are not available.
• Output from the subwoofer
• Subwoofer Level/Bass Boost

• Equalizer Control/Space Enhancer

Listening Position

(P.85, 88, 88)

• DSP Bypass Control

/Speaker Setup/Car

Type (DTA) Setup

(P.84, 81, 83)

Space Enhancer

Touch [Space Enhancer].

Space Enhancer screen appears.

Touch [Small], [Large], or [OFF].

Each setting value indicates the

soundscape level.

NOTE

• This setting is not available during tuner source.

Listening Position

You can adjust the sound effects according

to your listening position.

Touch [Position].

Position screen appears.

Select listening position from

[Front R] (Right front), [Front L] (Left
front), [Front All] (All front), [All], and
[User] using [

2] and [3].

NOTE

• You can store present setting in memory by

touching [P1], [P2], or [P3] for 2 seconds. You can
also recall the setting by touching corresponding
number.

• The final distance is adjusted to the total of car

type set up value

position and position DTA) value.

• If you change the car type set up value

, the

position is set to [All].

• Only the adjusted distance of position setup

(position and position DTA values) is stored in
memory. Therefore, the final adjustment distance
changes if you change the car type set up value