Philips CE152 Manual Do Utilizador

26 EN

13 Troubleshooting

Warning

 

•

Never remove the casing of this product.

To keep the warranty valid, never try to repair 

the product yourself. 

If you encounter problems when using this 

product, check the following points before 

requesting service. If the problem remains 

unsolved, go to the Philips Web page (www.

philips.com/support). When you contact Philips, 

make sure that the product is nearby and the 

model number and serial number are available.

General

No power or no sound 

 • The power supply from car battery is cut 

off, or the car battery runs out of energy. 

Power the system with car battery.

 • Car engine is not on. Turn the car engine 

on.

 • Cable is not correctly connected. Check 

connections.

 • The fuse is burnt. Replace the fuse.

 • Volume is too low. Adjust volume.

 • If the above solutions do not work, press 

the RESET button.

 • Make sure that the current track is in a 

compatible format.

Noise in broadcasts

 • Signals are too weak. Select other stations 

with stronger signals.

 • Check the connection of the car antenna.

Preset stations are erased.

 • Battery cable is not correctly connected. 

Connect the battery cable to the terminal 

that is always live.

Cannot switch the source to iPod/iPhone

•  Check whether the iPod/iPhone is securely 

connected.

•  Check whether the iPod/iPhone is 

compatible with this system.

•  Check whether the iPod/iPhone battery is 

nearly empty. Connect it to this system for 

charging first. 

Display shows ERR-12.

 • Data error. Check the USB storage device 

or SD/SDHC card.

About the Bluetooth device

Music playback is unavailable on the system 

even after successful Bluetooth connection.

 • The device cannot be used with the 

system to play music. 

The audio quality is poor after connection 

with a Bluetooth-enabled device.

 • The Bluetooth reception is poor. Move 

the device closer to the system or remove 

any obstacle between the device and the 

system.

Cannot connect with the system.

 • The device does not support the profiles 

required for the system. 

 • The Bluetooth function of the device is 

not enabled. Refer to the user manual of 

the device to find out how to enable the 

function.

 • The system is not in the pairing mode. 

 • The system is already connected with 

another Bluetooth-enabled device. 

Disconnect that device or all other 

connected devices and then try again.

The paired mobile phone connects and 

disconnects constantly.

 • The Bluetooth reception is poor. Move 

the mobile phone closer to the system or 

remove any obstacle between the mobile 

phone and the system.