Sanyo ECD-T1545 Manual Do Utilizador

Sometimes a simple operational error or a mistake in the wiring can appear to be a problem with 
the unit. Before having the unit serviced, refer to the troubleshooting chart below. 

 

The volume control is turned down. 

Turn up the volume control. 

 

The compact disc 
does not play when 
inserted into the 
unit. 

The power connections are not wired 
correctly. 

Check the +12V and ground
connections. 

The vehicle ignition is switched off. 

Switch the ignition to the “ON” 

or “ACC” position. 

No power. 
 

The fuse is blown. 

 

Replace the fuse with another 15A 
fuse. 

The unit does not 
work properly 
(Eject, Load, Play) 

The microcomputer has been affected 
by electrical noise. 

Press RESET button. 

The road surface is rough. 

 

Wait for the road surface to 
improve before playing a disc. 

The unit is not mounted securely. 
 

Install the unit securely. Be sure to 
use the rear strap if the vehicle
does not provide support for the 
rear of the unit. (See page 26) 

The sound from the 
CD player skips. 
 

The disc is defective. 
 

Try another disc. 
If it plays properly, the first disc
may be defective. 

 

The disc is dirty. 

 

Clean the disc as explained on 
page 3. 

No radio reception. 

 

The antenna cable is not connected. 
 

Insert the antenna cable firmly into 
the antenna jack on the unit. 

The radio does not 
stop on any 
stations when 
automatic tuning is 
used. 

The signals are weak. 

 

Select a station using manual 
tuning. 

 

   
 
 
 
 
 
 

 22