Sanyo DV-S100 Manual Do Utilizador
42
Procedure for installation (Suspended position)
Installation (3)
Installation of Remote control sensor
Using the velcro tape, install the Remote control sensor in a location that will not
obstruct driving.
obstruct driving.
Installation of FM modulator
Using the velcro tape, install the FM modulator to the floor or other surface.
Notes:
¡Before applying the Velcro tape, use the included cleaning cloth to wipe the
¡Before applying the Velcro tape, use the included cleaning cloth to wipe the
surface where the tape will be applied, then dry it completely.
¡If necessary, secure the remote control sensor cord with the cord clip supplied.
1
2
3
¡Confirm that the built-in
antivibration boards on
both the left and right sides
are set to the horizontal
installation position “H”.
both the left and right sides
are set to the horizontal
installation position “H”.
¡Attach Small bracket (L)
and Small bracket (R) to
the changer using the
hexagonal bolts (M5 x 8).
the changer using the
hexagonal bolts (M5 x 8).
¡Determine the mounting location
and drill four mounting holes.
¡Attach the changer with the tapping
screws (M5 x 12).
Hexagonal bolts
Built-in anti-vibration
board position
board position
Hexagonal
bolts
bolts
H
V
45
°
H
V
45
°
H
V
45
°
H
V
45
°
3.6ø
FM modulator
Velcro tape
Remote control
sensor
FM Modulator
Velcro tape
Remote
control
sensor
DV-S100/ZA(GB) 03.11.28 1:19 PM ページ42