PYLE Audio PLMRKT12 Manual Do Utilizador

8

FM1

FM2

FM3

AM

Switch on the unit by pressing any 
button. When system is on, press 
button (1) to turn off the unit.

Press SEL button (3) shortly to select
the desired adjustment mode.
The adjustment mode will change in
the following order:

By rotating the audio knob (3) it is
possible to adjust the desired sound
quality.

Press BND/LOU button (4) for 
several seconds to reinforce the bass
output. Press it for several seconds 
again to release this function.

Exhibit current frequency and 
activated functions on the display (6).

This unit can be connected to a
portable audio player through the AUX
IN jack (13).

Press to mute the sound, press it (8)
again to resume the sound.

Press EQ button (7) to turn on
equalization function and to select
desired audio mode. There are five
kinds of mode as below:

Point the remote cantrol handset to 
the remote sensor IR (5). Press the 
function keys on the handset to 
control the system.

RESET button (25) must be activated
with either a ball point pen or thin 
metal object.  The RESET button is to
be activated for the following 
reasons:

- Initial installation of the unit when all 

wiring is completed.

- All the function buttons do not 

operate.

- Error symbol on the display.
Note:  If press RESET button (25), the 
unit can’t work yet, please use a cotton 
swab soaked in isopropyl alcohol to 
clean the socket on the back of the 
front panel.

Press MODE button (11) shortly to 
select radio mode, the radio mode 
appears in the display together with 
the memory band and frequency.

BAND
At radio mode, press BND/LOU(ENT)
button (4) shortly to select the desired
band.
The reception band will change in the
following order:

Press 

 button (2) or 

 button (24)

shortly to activate automatic seek
function.  Press for several seconds
until “MANUAL” appears on the
display, the manual tuning mode is
selected.  If both buttons have not
been pressed for several seconds,
they will return to seek tuning mode
and “AUTO” appears on the display.

PROGRAM SCANNING
- Automatic Memory Storing
Press AS/PS button (10) for several
seconds, the radio searches from the
current frequency and checks the
signal strength until one cycle search
is finished.  And then 6  strongest
stations are stored into the
corresponding preset number button.
- Program Scanning
Press AS/PS button (10) shortly to
scan preset station. When the field
strength level is more than the
threshold level of stop level, the radio
is holding at that preset number for
several seconds with releasing mute,
then searches again.

VOL

BAS

TRE

BAL

FAD

(Volume)

(Bass)

(Treble)

(Balance)

(Fader)

FLAT

CLASSICS

POP M

ROCK M

DSP OFF