Blaupunkt RCM 127 Manual Do Utilizador
28
3
For instantly muting the volume.
By pressing the
By pressing the
button the volume
can be muted immediately. “MUTE”
will appear in the display.
The function is cancelled by pressing
button
will appear in the display.
The function is cancelled by pressing
button
or VOL+.
When pressing VOL-, the
(mute)
volume will be adopted.
To programme the mute volume level,
proceed as follows:
•
To programme the mute volume level,
proceed as follows:
•
Adjust the desired volume.
•
Press
for 1 second until you
hear a beep.
Now this volume level is stored as your
mute volume.
mute volume.
Switching on/off via the ignition:
When connected correspondingly, the
set can also be turned on and off with
the vehicle ignition.
After the ignition has been switched
off, a double beep tone will remind you
that you should remove the KeyCard
before leaving your vehicle.
When connected correspondingly, the
set can also be turned on and off with
the vehicle ignition.
After the ignition has been switched
off, a double beep tone will remind you
that you should remove the KeyCard
before leaving your vehicle.
Switching on with the ignition being
switched off:
To keep on operating the set when the
ignition is switched off (KeyCard is in-
serted), proceed as follows:
Press ON. The unit will be turned on.
To avoid that the battery goes flat, the
system will be turned off automatically
after one hour of playback.
switched off:
To keep on operating the set when the
ignition is switched off (KeyCard is in-
serted), proceed as follows:
Press ON. The unit will be turned on.
To avoid that the battery goes flat, the
system will be turned off automatically
after one hour of playback.
2
VOL+ / VOL-
To alter the volume.
Each time the set is switched on, it will
play with the pre-adjusted volume
(VOL FIX).
You may also change the VOL FIX set-
ting (see chapter “DSC programming”).
To alter the volume.
Each time the set is switched on, it will
play with the pre-adjusted volume
(VOL FIX).
You may also change the VOL FIX set-
ting (see chapter “DSC programming”).
Quick reference
1
Switching on/off with the ON button:
Press ON.
When switching the set on with the ON
button, the KeyCard has to be insert-
ed. The unit will play with the pre-ad-
justed volume.
Press ON.
When switching the set on with the ON
button, the KeyCard has to be insert-
ed. The unit will play with the pre-ad-
justed volume.
Switching on/off with the KeyCard:
The set has to be turned on with the
ON button.
The set has to be turned on with the
ON button.
Note:
Read the information in chapter
“KeyCard theft protection system”.
Read the information in chapter
“KeyCard theft protection system”.
Coburg ..RCM127 gb
13.02.2001, 10:19 Uhr
28